Zigmund Shtain EN 182.512 A - Инструкция по эксплуатации - Страница 36

INSTRUCTIONS FOR USE 

Setting the end of cooking  

To start cooking immediately and set cooking time, proceed as follows: 

−

  put the dishes to be cooked in the oven and select the function and temperature 

desired using the functions selector and the thermostat 

−

 touch the 

SELECT

 symbol repeatedly until the flashing     symbol appears and 

set the cooking time within 5 seconds, pressing 

+

 or 

-

. 

After a few seconds, the current time will reappear and the     and 

AUTO 

symbols 

will stay on. 

The remaining cooking time can be checked by pressing the 

SELECT

 symbol until 

the   symbol is selected, or modified or zeroed by pressing 

+

 or 

-

. 

When the cooking is finished, the buzzer sounds and the oven is switched off 

automatically, the display shows 0.00 and 

MAN 

flashes. To deactivate the buzzer, 

press any of the controls; touch 

SELECT

 to put the programmer back to manual, 

the 

MAN

 symbol stops flashing and the oven can be used again. 

Setting the start and the end of cooking  

To programme both the starting time and the end of cooking, proceed as follows: 

−

 touch the 

SELECT

 control until the     symbol appears, set the cooking time 

pressing 

+

 or 

–

 within 5 seconds; 

−

 touch the 

SELECT

 control again until the     symbol is selected to set the end 

of the cooking. 

−

 put the dishes to be cooked into the oven and select the function and the 

temperature desired through the function selector and the thermostat. 

The cooking will start from the end of cooking time minus the cooking time. 5 
seconds after the release of the controls the current time will reappear and the 

AUTO 

will stay active as will the     symbol at the start of cooking. 

When the cooking is finished, the buzzer sounds and the oven is switched off 
automatically. To deactivate the buzzer, press any one of the controls; touch 

 to bring the programmer back to manual. The 

MAN

 symbol stops flashing 

and the oven can be used again. 
To cancel the programme, zero the cooking time. 
 

Safety lock  

This electronic programmer has a function that locks the oven or the programmings 
set. 
The lock does not work when the timer is active. 

Activation: 

touch the + control for about 5 seconds then the     symbol will 

appear.  

Notes: 

−

  if the lock is activated with the display showing the current time and no 

programming set (end of cooking or start and end of cooking), the oven is 
locked 

−

  if it is activated with the oven functioning or a programming selected (end of 

cooking or start and end of cooking), the lock prevents modifying the 
programmings. 

Deactivation:

touch the + control for about 5 seconds. 

SELECT

12 - ENGLISH