Духовые шкафы WEISSGAUFF OE 691 PDB/PDI/PDW/PDX - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
13
Adjusting the Cooking Duration Time:
This function is used to cook in the desired time range. The foods to be cooked are put into
the oven. The oven is adjusted to the desired cooking function. The oven temperature is
adjusted to the desired degree depending on the dish to be cooked. Touch on the “M” sensor
until you see Duration time symbol “
|>|
” on the timer display screen. “
AUTO
” appear on the
display.
Adjusted the cooking period for the food you wish to cook, by using the Timer Plus
and minus sensor while the timer is in this position. Some time after the adjustment
operation
is completed, the day's time will appear on the screen and the Duration time symbol will
begin to continuously light on the screen.
At the completion of the set duration, the timer will stop the oven and give an audible
warning. Also, “
AUTO
”
will begin to flash on the screen. Touching any sensor of the control
unit will end the audible warning. “
AUTO
” will go on to flash. Touch “
-
“ and “
+
“ symbols at
the same time to finish “
AUTO
” mode.
Adjusting the Cooking End Time:
This function is used to cook after a certain period of time, within certain duration. The food to
be cooked is put into the oven. The oven is adjusted to the desired cooking function. The
oven temperature is adjusted to the desired degree depending on the dish to be cooked.
Touch on the “M” sensor until you see Duration time symbol “
|>|
” on the timer display
screen. “
AUTO
” appear on the display.
Adjusted the cooking period for the food you wish to
cook, by using the Timer Plus and minus sensor while the timer is in this position.Then touch
the “M” sensor until you see “
>|
”
symbol.
the day time will begin to flash, with the addition of
the cooking period. Adjust the finishing time for the
food by using the Timer Plus and minus
sensor while the timer is in this position.
Some time after the adjustment operation is
completed, the day time will appear on the screen and the “
>|
” symbol will begin to
continuously light on the screen. The oven will start operating at the time calculated by
deducting the cooking period from the set finishing time, and will stop at the set finishing
time. The timer will give an audible warning and “
AUTO
”
will begin to flash on the screen will
begin to flash. Touching any button of the timer will end the audible warning. “
AUTO
” will go
on to flash. Touch “
-
“ and “
+
“ symbols at the same time to finish “
AUTO
” mode.
Digital Timer Sound Adjustment:
Touch “-“ sensor until you hear sound.
timer will give an audible signal beep. After that each
time “-“
sensor is touched,
timer will give three different types of signal beep. Do not touch
any further sensor and timer will save the last selected signal type.
Key Lock Function
The key lock function is used to prevent operating any functions of the control unit by
mistake.
Touch “+” sensor until you see key lock symbol on the display to activate key lock.
Touch the “+” sensor to deactivate key lock.
While oven is operating, if control switches and touch buttons are not pushed or
touched for 3 hours, oven turns off.
