Fulgor Milano QO 6009 PT X - Инструкция по эксплуатации - Страница 18

18

itself off. Turn the thermostat and selector knobs back to 
0 position and press the manual key.  

Fully automatic operation

To set the end of cooking time, press the duration key 
and press the +/- keys to set the duration of cooking. 
Press the end of cooking key and press the +/- keys to 
set the time at which you want the oven to switch off.
When you finish setting these times, the AUTO symbol 
flashes and the buzzer sounds. Press any key to silence 
it.

Alarm timer

Press the alarm timer key and press the +/- keys to set 
the required duration of cooking. The buzzer sounds 
when the cooking time ends. Press any key to silence it. 

Programming errors

You cannot program in a cooking period which starts 
earlier than the time displayed on the clock. If you try to 
do so, the buzzer sounds and the AUTO symbol flasher. 
Simply change the duration or cooking time to correct 
the error. 

Cancelling a cooking programme

To cancel a cooking programme, simply press the 
manual key.

Timer touch control

Setting the clock

Fig. 1

“Auto” and “0:00” will start flashing when the unit is 
switched on for the first time. To set the clock, press the 
central button for about 3 seconds. When     appears, 
press “+” or “-“ to set the correct  time.
Wait until a beep tells you that the clock has been set 
(figure 1). 
To set the time at a later stage, press “+” and “-” together 
for 3 seconds and then adjust the clock as  described 
above.

Minute counter

Fig. 2

As this minute counter does not control the oven, when it 
finishes counting the oven will continue to work.
To set, press the central button for 3 seconds     until 
appears (figure 2). Press “+” and “-” to set the required 
time.
To set the minute counter at a later stage, press the 
central button for 3 seconds and adjust as  described 
above.
The minute counter beeps when it finishes counting. To 
disable it, press any button.  

Cooking time

Fig. 3

This is a semi-automatic cooking function. It can be used 
to set cooking times.  
Press the central button for 3 seconds. Then press it 
again until “dur” appears (figure 3). Press “+” and “-” to 
set the required cooking time.

End of cooking time

Fig. 4

The end of cooking time can also be set.
Press the central button for 3 seconds. Press the central 
button twice consecutively and wait for  “End” to appear 
(figure 4). Press “+” and “-” to set the required end of 
cooking time.
The oven will work in the set mode and at the set 
temperature until the end of cooking time.

GB