Fulgor Milano QO 6007 MT X - Инструкция по эксплуатации - Страница 19

19

Programming automatic cooking

Fig. 5

Cooking function with set times.
Press the central button for 3 seconds. Then press it 
again until “dur” appears. Press “+” and “-” to set the 
required cooking time. Wait a few seconds for the setting 
to be memorised.
Press the central button for 3 seconds. Press it another 
two times and wait for “End” to appear  (figure 4). Press 
“+” and “-” to set the required end of cooking time.  

E.g.:
Current time: 12.30
Cooking time: 10 minutes
End of cooking time: 14.00
The oven will start cooking at 13.50 (14.00 less 00.10) 
at the set temperature and in the set mode  and will stop 
at 14.00.
The oven will beep when it stops cooking. To disable it, 
press any button.

Adjusting beep volume

Fig. 6

To adjust beep volume, press “+” and “-” together. Then 
press the central button and wait for “ton1” (high volume) 
to flash. Press “-” to select “ton2” (medium volume) or 
“ton3” (low volume).  
Press the central button to set the selected volume.

Replacing the oven light

IMPORTANT: 
The oven light must have these precise features: a) it 
must be able to resist high temperatures (up to 300°C) 
 

b) power supply: see V/Hz indicated on data plate. 

c) power 25W. 

  d) E 14 connection. Before proceeding, disconnect 

the appliance from the main electricity supply. 

-  To prevent damage, place a tea cloth in the oven;
-  unscrew the glass cover of the light;
-  unscrew the old light bulb and replace it with the new 

one;

-  put back the glass cover and remove the tea cloth;
-  connect the appliance to the main electricity supply;

GB