Fulgor Milano FCSO 4511 TM BK - Инструкция по эксплуатации - Страница 59

EN

27

Electrical Hook-Up

Before connecting to the electricity, make sure that:
• the characteristics of the electrical system satisfy what is 

shown on the serial number plate applied to the front of the 

oven;

• the system has an effective earth connection compliant with 

current standards and laws.

The earth connection is required by law. The cable must not, at 

any point, reach a temperature greater than 50 °C above the 

ambient temperature.

This oven must be connected to the electricity through a power 

supply cable and plug that is compatible with the outlet of the 

electrical system that powers this oven.

If a fixed appliance does not have a power cord and plug, 

or another device that ensures disconnection from the mains, 

with an opening distance of the contacts that allows complete 

disconnection under the conditions of excessive voltage 

category III, such disconnection devices must be provided in 

the power supply mains conforming to the installation rules.

The omnipolar socket or switch must be easy to reach when the 

appliance is installed.

Note:  The manufacturer declines all liability if the usual accident 

prevention standards and the above instructions are not 

followed.

TYPE AND MINIMUM DIAMETER OF THE CABLES

SASO

H05RR-F

3x1,5 mm²

H05RR-F

3x2,5 mm²

H05VV-F

3x1,5 mm²

H05VV-F

3x2,5 mm²

H05RN-F

3x1,5 mm²

H05RN-F

3x2,5 mm²

H05V2V2-F 3x1,5 mm²

H05V2V2-F 3x2,5 mm²