Fulgor Milano FCLCMO 4510 TEM BK - Инструкция по эксплуатации - Страница 46

EN

10

3 - General Oven Information

Error codes

This code appears in the event of the electronic control 

indicating a fault. When the error appears, the current 

function is blocked. If the type of error is related to a safety 

function, the oven becomes unusable and every time a start 

attempt is made, the same error appears (in which case 

call in the after-sales service), while if the error relates to 

a minor fault, after being restarted the oven can be used 

for the functions that do not involve the faulty part (e.g., a 

heating element).

Beeps

Confirms that the command has been received after a key 

has been pressed.

It also indicates that a time function has been completed 

(e.g. Timer or Timed Cooking). During the execution of a 

recipe, an acoustic signal warns the user that the oven is 

waiting for operation by the user (e.g., insert the dish or 

turn it over).

Beeps also signal an oven fault.

Default Settings

The cooking modes automatically select a suitable 

temperature when the cooking mode is selected, these can 

be changed when a different one is needed.

F Failure Number Codes

These codes are displayed when the electronic control 

detects a problem in the oven or in the electronics.

The error code is recorded in the Error Log in the Setup 

menu. This error can be communicated to the service 

technician so he/she can understand the possible cause of 

the problem in advance.

Preheat

Whenever a cooking mode is set and the oven is heating, 

the preheating starts, during this period, the instantaneous 

temperature is displayed together with the thermometer 

icon.

As soon as the 100% is reached, the control sounds an 

“end of preheat” tone and the current temperature value 

disappears.

Locking the keyboard

Hold the   key for 3 seconds. Commands are now locked 

and a “Key icon” will be displayed.

Repeat the same operation for 3 seconds to unlock the 

keyboard.

NOTE:  The power off operation is always available.

Timer

WARNING

The timer on your oven does not turn the appliance on 

or off, its only purpose is to alert you through the buzzer.  

When you want to turn off the oven automatically, use the 

end-of-cooking or delayed cooking function.

NOTE:

 Pressing the OFF button does not reset or stop the 

timer.

1.  Press the button   and set the desired time using the 

arrows     and confirm with the button   . To switch 

the selection between hours and minutes use the arrows 

  .

2.  The time can be set from 1 minute to 12 hours and 59 

minutes and, when set, the remaining time is always 

visible in the bottom status bar until the time expires or is 

reset.

3.  To change or cancel the time set, you must reset the 

timer by pressing and holding the button   for a few 

seconds.

4.  Timer format is usually HR:MIN, switching into MIN:SEC 

during the last minute.

5.  When the time expires, the display shows 00:00 and 

the buzzer will sound for one minute or until the button 

 is pressed.

Before using your oven for the first time remove all packing and foreign materials from the oven(s). Any material of this sort 

left inside may melt or burn when the appliance is used.