Metabo SBEV 1300-2 S - Инструкция по эксплуатации - Страница 13

ENGLISH

en

13

Original instructions

We declare under our sole responsibility: These 
impact drills, identified by type and serial number 
*1), comply with all relevant requirements of the 
directives *2) and standards *3). Technical file at *4) 
-  

Fig. P

The machine is suitable for drilling, without impact, 
in metal, wood, plastic and similar materials and for 
impact drilling in concrete, stone and similar mate-
rials. It is also suitable for thread tapping and for 
screwdriving (not SB 850-2).
The user bears sole responsibility for any damage 
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be 
observed.

For your own protection and for the 
protection of your power tool, pay atten-
tion to all parts of the text that are marked 
with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 
fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 
documents.

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a "live" wire may make exposed metal 
parts of the electrical tool "live" and could give the 
operator an electric shock.
Pull the plug out of the plug socket before any 
adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the 
switch when the plug is removed from the mains 
socket or in case of a power cut.

Ensure that the spot where you wish to work is free 
of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).
Smaller workpieces must be secured such that they 
are not carried along with the drill bit when drilling 
(e.g. by clamping in a vice or on a work bench with 
screw clamps).
Keep hands away from the rotating tool! Remove 
chips and similar material only with the machine at 
standstill.
Metabo S-automatic safety clutch. When the safety 
clutch responds, switch off the machine immedi-
ately! If the tool jams or catches, the power supply 
to the motor is restricted. Due to the strong force 
which can arise, always hold the machine with both 
hands using the handles provided, stand securely 
and concentrate.
The Metabo S-automatic safety clutch must not be 
used for torque control.
Caution with hard screwdriving (driving of screws 
with either a metric or an imperial thread into steel)! 
The head of the screw may rip off or high restoring 
torques may be incurred at the handle.

Reducing dust exposure:

Some of the dust created using this power tool 
may contain substances known to cause 

cancer, allergic reaction, respiratory disease, birth 
defects or other reproductive harm. Some 
examples of these substances are: lead (from lead-
based paints), crystalline silica (from bricks cement, 
etc.), additives for wood treatment (chromate, wood 
preservative), some types of wood (like oak and 
beech dust), metals, asbestos.
The risk from exposure to such substances will 
depend on how long the user or nearby persons are 
being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a 
well ventilated area and wear protective equipment, 
such as dust masks that are specially designed to 
filter out microscopic particles.
Observe the relevant guidelines for your material, 
staff, application and place of application (e.g. 
occupational health and safety regulations, 
disposal).
Collect the generated particles at the source, avoid 
deposits in the surrounding area.
Use only suitable accessories. In this way, fewer 
particles enter the environment in an uncontrolled 
manner. 
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 
or on dust deposits.

- Use an extraction unit and/or air purifiers.
- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 
or blowing stirs up dust.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions