Metabo PowerMaxx SB - Инструкция по эксплуатации - Страница 10

ENGLISH

en

10

- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush.

See page 2.

1 Chuck  *

2 LED  lights

3 Adjusting  sleeve 

(torque control, maximum torque) *

4 Adjusting  sleeve 

(torque limitation) *

5 Adjusting  sleeve 

(screw driving, drilling, impact drilling) *

6 Slide-switch (1st/2nd gear)

7 Battery indicator to check the battery's charge 

level

8 Belt  hook

9 Rotation selector switch (direction of rotation 

setting, transporting safety device)

10 Trigger

11 Battery pack release button

12 Battery pack

13 Protective cap *

* depending on model

6.1 The machine's multifunctional monitoring 

system

If the machine switches off automatically, the 

machine electronics have activated automatic 

protection mode. A warning signal sounds 

(continuous beeping). The beeping stops after a 

maximum of 30 seconds or when the trigger is 

released (10).

In spite of this protective function, overloading 

is still possible with certain applications and 

can result in damage to the machine.

Causes and remedies:

1.

Battery pack almost flat

 (the electronics 

prevent the battery pack from discharging totally 

and avoid irreparable damage).
If the battery pack is almost flat, it must be 

recharged.

2. Long continuous overloading of the machine will 

activate the 

temperature cut-out

.

Leave the machine or battery pack to cool. 
Note: The machine will cool more quickly if you 

operate it at idling speed.

3. If the 

current is too high 

(for example, if the 

machine seizes continuously for long periods), 

the machine switches off.

Switch off the machine at the trigger (10). Then 

continue working as normal. Try to prevent the 

machine from seizing.

6.2 Battery pack

Charge the battery pack before use.
If performance diminishes, recharge the battery 

pack.
The ideal storage temperature is between 10°C and 

30°C.

Removing the battery pack

Press the battery pack release (11) button and 

remove the battery pack (12).

To fit

Slide in the battery back (12) until it engages .

6.3 Setting the direction of rotation, 

engaging the transporting safety device 

(switch-on lock)

Do not activate rotation selector switch (9) 

unless the motor has completely stopped!

Actuate the rotation selector switch (direction of 

rotation setting, transporting safety device) (9).
See page 2.

R

= Clockwise setting

L

= Counter-clockwise setting

0

= Middle position: transportation safety device

(Switch-on lock) set

6.4 Selecting gear stage

1st gear (low speed,

particularly high torque, preferable for 

screwing)

2nd gear (high speed, preferable for drilling)

6.5 Set torque limitation, screw driving, 

drilling, impact drill

Machines with the designation BS...

1...20 = Set 

torque

 (with torque limitation) by 

turning the sleeve (3) - intermediate 

settings are also possible.

= Set 

drilling

 by turning the sleeve (3) (max. 

torque, without torque limitation) 

To avoid overloading the motor, do not 

jam the spindle.

Machines with the designation SB...:

= Set 

screw driving

 by turning the sleeve 

(5) 

AND

set the 

torque

 (with torque limitation) by 

turning the sleeve (4) - intermediate 

settings are also possible.

= Set 

drilling

 by turning the sleeve (5) (max. 

torque, without torque limitation) 

To avoid overloading the motor, do not 

jam the spindle.

= Set 

impact drilling

 by turning the sleeve 

(5) (max. torque, without torque limitation) 

To avoid overloading the motor, do not 

jam the spindle.

5. Overview

6. Use

1

2

1

2