Дрели Makita HP2051H - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Lock button
1-2. Speed control screw
1-3. Switch trigger
1-4. Higher
1-5. Lower
2-1. Lamp
3-1. Reversing switch lever
4-1. Arrow
4-2. Speed change knob
5-1. Action mode changing lever
6-1. Grip base
6-2. Side grip (auxiliary handle)
6-3. Teeth
6-4. Protrusions
7-1. Chuck key
8-1. Sleeve
8-2. Ring
9-1. Depth gauge
10-1. Blow-out bulb
11-1. Vent holes
SPECIFICATIONS
Model HP2050/HP2050F
HP2051/HP2051F
Speed High
Low
High
Low
Concrete
20 mm
-----
20 mm
-----
Steel
8 mm
13 mm
8 mm
13 mm
Capacities
Wood
25 mm
40 mm
25 mm
40 mm
No load speed (min
-1
)
0 - 2,900
0 - 1,200
0 - 2,900
0 - 1,200
Blows per minute
0 - 58,000
0 - 24,000
0 - 58,000
0 - 24,000
Overall length
362 mm
360 mm
Net weight
2.5 kg
2.5 kg
Safety class
/II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 97 dB(A)
Sound power level (L
WA
) : 108 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 13 m/s
2
Uncertainty (K) : 3 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
