STATUS MX1000 - Инструкция по эксплуатации - Страница 3

3

EN

INTENDED USE

GENERAL SAFETY RULES

INTENDED USE 

GENERAL SAFETY RULES

The machine is intended for mixing building materials that are in a fluid or powder form, 

e.g. paint, mortar, adhesives, plaster and similar substances. 

Depending on the consistency of the material and the amount to be mixed, the appropriate 

agitator with the suitable mixing effect should be used. The machine may only be utilised 

for its intended use.

WORK AREA

• 

Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

• 

Do not operate power tools in explosive atmospheres, such as in the presence of 

flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or 

fumes.

• 

Keep children and bystanders away while operating a power tool.

Distractions can 

cause you to lose control.

ELECTRICAL SAFETY

• 

Power tool plugs must match the outlet. Never modify the plug in any way. Do not 

use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and 

matching outlets will reduce risk of electric shock.

• 

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, 

ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed 

or grounded.

• 

Do not expose power tools to rain or wet conditions. 

Water entering a power tool will 

increase the risk of electric shock.

• 

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, sharp edges or moving parts. 

Damaged or 

entangled cords increase the risk of electric shock.

• 

When operating a power tool outdoors, use an extension cord suitable for outdoor 

use. 

Use of a cord suitable for outdoor use reduces the risk of electric shock.

• 

Connect the electric power tool to electricity, using a 16 A maximum secure contact 

protected outlet (220-240V~, 50 Hz).

We recommend you to attach a residual current 

circuit-breaker (RCD) that does not exceed 30mA. 

PERSONAL SAFETY

• 

Stay alert, watch what you are doing and use common sense when operating a 

power tool. Do not use a power tool while you are tired or under the influence of 

drugs, alcohol or medication.

A moment of inattention while operating power tools may 

result in serious personal injury.