Домашние кинотеатры Elenberg HT-115 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
29
nected with 5.1 channel ampliier, this item should be selected. (only for
5.1CH player)
SPDIF SETUP PAGE
• SPDIF OUTPUT
SPDIF OFF: no digital signal out( optical or coaxial output off ), only ana
-
log audio output.
SPDIF/RAW: digital signal output in the original format recorded in the
disc.
SPDIF/PCM: digital signal output in the decoded PCM form.
• MANUAL: If this item is selected, you can set up the following CD, DOLBY
DIGIT,DTS and MPEG respectively.
• CD, DOLBY DIGITAL, MPEG
In SPDIF MANUAL mode, the above setup will work. Make the SPDIF setup
respectively for CD, DOLBY DIGITAL and MPEG. The initial factory setup
is SPDIF/RAW.
• PCM CHANNEL
In SPDIF/PCM mode, setup PCM channel according to your preference.
LPCM OUT
Select PCM frequency at 48kHz or 96kHz.
DOLBY DIGITAL SETUP:
• DYNAMIC
Select this to reduce the overall volume and still keep deined audio
sound.
CHANNEL DELAY PAGE (NOT AVAILABLE FOR 2CH DVD)
If the above setup dissatisies you, you can set the speaker distances in
the real conditions. Press the key UP/DOWN to select the speaker, Press
the key LEFT/RIGHT to adjust the distance.
3D PROCESSING (NOT AVAILABLE FOR 2CH DVD)
In PROLOGIC ON mode, the reverb mode setup is available. The initial
factory setup is off.
HDCD SETUP PAGE (NOT AVAILABLE FOR 2CH DVD AND DVD WITHOUT
DTS)
You can select the digital ilter at 44.1kHz, 88.2kHz and OFF.
VIDEO SETUP PAGE:
• COMPONENT VIDEO
YUV: set video output in analog component video format when connect
-
ing to Y/U/V terminals
P-YUV: set progressive YUV signals. Connection same as YUV
RGB: set video output in Red/Green/Blue format when connecting to
SCART terminals
The following two items will not be available for some units:
P-RGB: progressive RGB signals. Connection same as RGB
VGA: set to this item when connecting to VGA terminals.
• Notes:
If the video setting differs with the physical connection, the TV set may
