Чайники VITEK VT-1123 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
СХЕМА И ОПИСАНИЕ ЧАЙНИКА
1. Крышка чайника
2. Ненагреваемая ручка чайника
3. Носик чайника
4. Кнопка “Вкл./Выкл.”
5.
Корпус чайника
6.
Подставка, позволяющая
вращать чайник на 360°
7. Сетевой шнур
8. Съемный фильтр
9. Шкала чайника
CLEANING AND MAINTENANCE
•
Before cleaning the kettle, ensure it has been unplug. Do not immerse the
appliance in water, detergent or put into the dish washer.
•
Clean the outside surface of the appliance with a damp cloth only. Never
use abrasive cleaner or thinner for the cleaning.
•
Clean the filter with mild detergent and rinse thoroughly after removal from
the kettle.
•
Wipe the kettle thoroughly with a damp cloth and ensure that all the elec-
trical connections are completely dry out before using the kettle again.
•
This appliance is maintenance-free.
DESCALING
•
Scale build up will cause the element to overheat, reducing its working life.
It may also cause the safety cut-out to operate prematurely, switching the
kettle off before the water boils.
•
Scale removal can be done by using either of descaling product for kettle
which is available in most of the shop or 5% vinegar solution. Heat the
solution for a while, unplug the kettle and leave to stand for about half hour.
Pour away the acidic solution and rinse it thoroughly with clean water.
•
The use of descalers containing phosphoric acid, sulphamic acid or simi-
lar substances must not be used as they may damage the kettle.
MINIMIZE SCALE BUILD-UP
Empty the kettle after each use; don't allow water to stand in the kettle
overnight; use filter water instead of ordinary tap water. Although stainless
steel heater plate can help to reduce the build-up of scale. However, periodic
descaling will maintain the best performance of the kettle. The descaling inter-
vals depend on the hardness of your local water supply. Descaling may be
necessary as often as once a month in areas of very hard water.
SPECIFICATION
Power requirement
230 V ~ 50 Hz
Max. power
2000 W
Max indication of water
1,2 L
SERVICE LIFE OF THE KETTLE NOT LESS THAN 3 YEARS
ENGLISH
6
РУССКИЙ
Vt-1123.qxd 25.05.04 12:31 Page 12
