Чайники VITEK VT-1104 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IMPORTANT INSTRUCTIONS
•
Please read these instructions before operating and retain for future reference.
•
DO NOT TOUCH HOT SURFACES, use the handle.
•
To protect against electrical hazards, do not immerse any part of the appliance in
water or any other liquid.
•
Close supervision is necessary when the appliance is near children.
•
Never leave the appliance unattended in use.
•
Always unplug from the plug socket when not in use and before cleaning,
•
Always allow the appliance to cool before cleaning or storing.
•
Do not operate any appliance with a damaged cord or plug, after an appliance ma
functions, or if it has been damaged In any manner.
•
Do not let the power cord hang over the edge of a table or counter, touch hot surZ
faces or become knotted.
•
Always store excess portion of the power cord in the storage compartment of the
base unit.
•
Do not place this appliance on or near a hot gas or electric burner; in or where it
could touch a heated oven, or microwave oven.
•
Exercise caution when carrying the kettle full of boiling water and when pouring
from it.
•
Always place the kettle on a flat surface and away from extreme heat.
•
Do not use a base unit other than the one supplied.
•
Do not, use the kettle to heat anything other than water.
•
Do not remove lid during boiling cycle.
•
Do not fill above 'max' indication.
•
If this product is filled above the maximum level hot water may be ejected.
•
Ensure kettle is switched off before removing from base unit.
•
Do not fill kettle when positioned on base.
•
Do not allow kettle to boil dry. Allow to cool, unplug and refill with cold water.
•
Beware of steam being emitted from spout or lid especially during refilling.
•
Do not operate kettle if water level is below minimum.
HOW TO USE THE KETTLE
Filling
•
Remove the kettle form the base unit before filling.
•
Open the kettle lid. Now you can fill the kettle. However, don`t forget to close the
lid after filling otherwise the kettle will not automatically switch off after use.
•
Do not fill up to MIN indication to prevent the kettle running dry while operating.
•
Do not fill with more than MAX indication (1,8 litres). Avoid overfilling to prevent
boiling water being ejected form around the top of the kettle.
Switching on
•
Place the kettle on the base unit, which is connected to a wall socket. The appliZ
ance is switched on by pressing the switch. The pilot light will come on.
ENGLISH
3
10
1104.qxd 29.08.03 14:27 Page 6
