Russell Hobbs 26300-70 - Инструкция по эксплуатации - Страница 4

4

BEFORE USING FOR THE FIRST TIME

Fill to 

max

, boil, discard the water, then rinse. Do this twice to remove any manufacturing dust, 

etc.

FILLING

1.  Open the lid.

2.  Fill with at least 1 cup of water, but not above max.
3.  If you want only 1, 2, or 3 cups of water, fill to the 1, 2, or 3 marks inside the kettle.
4.  Close the lid, and press down to lock it.

USING YOUR KETTLE

1.  Put the stand on a stable, level surface.

2.  Plug the stand into the wall socket.
3.  Put the kettle on the stand.
4.  Move the switch to 

I

.

5.  The light will come on. The kettle will start to heat.
6.  When the water boils the kettle will switch off.

7.  To switch off manually, move the switch to 

O

, or simply lift the kettle off the stand.

GENERAL

Note: When you lift your kettle, you may see moisture on the stand. This is normal and is caused 

by the steam used to switch your kettle off automatically.

BOIL DRY PROTECTION

If your kettle boils dry, a safety cut-out device will automatically switch it off. If this happens, 

unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle 

to boil dry will shorten the life of the element.