Russell Hobbs 24402-70 - Инструкция по эксплуатации - Страница 4

4

4. 

Move the switch to 

I

.

5. 

The light will come on. The kettle will start to heat.

6. 

When the water boils the kettle will switch off.

7. 

To switch off manually, move the switch to 

O,

 or simply lift the kettle off the stand.

GENERAL

Note: When you lift your kettle, you may see moisture on the stand. This is normal and is caused by the 
steam used to switch your kettle off automatically.

BOIL DRY PROTECTION

If your kettle boils dry, a safety cut-out device will automatically switch it off. If this happens, unplug your 
kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle to boil dry will shorten 
the life of the element. 

CARE AND MAINTENANCE

1. 

Unplug the stand, and let the kettle cool before cleaning.

2. 

Wipe all surfaces with a clean damp cloth.

3. 

Open the lid.

4. 

Put a finger into the spout, and press on the centre of the filter, to push it into the body of the kettle.

5. 

Lift the filter out of the kettle.

6. 

Rinse the filter under a running tap while brushing with a soft brush.

7. 

From inside the kettle, press the filter into the spout, till the hooks on the filter grip the inside of the 
spout.

8. 

Replace the lid.

Descale regularly, (at least monthly).

Descale the appliance with a proprietary descaler. Follow the instructions on the package of descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.

ENVIRONMENTAL PROTECTION

W

To avoid environmental and health problems due to hazardous substances in electrical 
and electronic goods, appliances marked with this symbol mustn’t be disposed of with 
unsorted municipal waste, but recovered, reused, or recycled.