Redmond RK-G176-E - Инструкция по эксплуатации - Страница 7

RK-G176-E

7

GBR

CAUTION! In case you take the kettle off the base without switching it off, inner illu-

mination will be off, while I/0 button will remain in I position. The kettle will resume 

operation once you have placed it on the base. You are advised to switch off the appli-

ance every time you take it off pressing I/0 button in 0 position.

11. 

Once you have finished, unplug the device.

Safety system 

•

The kettle is supplied with an automatic shut-off system upon boiling.

•

In case of water shortage the automatic overheat protection turns off the kettle. 

Wait till the appliance is cooled, thereafter it will be ready for operation. 

I I I.     C L E A N I N G  A N D  M A I N T E N A N C E

CAUTION! Before cleaning the kettle or the kettle base unplug the appliance, drain 

water and let the unit cool down. 

Regularly clean the kettle housing and wipe the base with a damp cloth. Let the kettle 

and kettle base dry thoroughly before use. 

DO NOT immerse the base of the appliance in water or keep in running water! 
DO NOT use coarse tissues or sponges, abrasive pastes for cleaning. It is also not 

recommended to use any chemically aggressive or other substances, not recommended 

for use with items which contact with food.

While in operation scale deposits may form on both the heating element and the 

housing inner walls of the appliance depending on water type being used. Use special 

nonabrasive cleaning substances for kitchen utensils and appliances. 

1.  Let the kettle cool down before cleaning.
2.  Follow the product cleaning and application instructions.
3.  Thoroughly wash the kettle with water after cleaning.
4.  Wipe the appliance with a damp cloth.

CAUTION! Before use ensure that electric contacts of the appliance are dry.

Before repeated operation or storage completely dry all parts of the appliance. Store 

the assembled appliance in a dry, ventilated place away from heating appliances and 

direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that 

may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.

I V. B E F O R E  CO N TACT I N G  S E RV I C E  C E N T R E

Problem

Possible cause

Solution

Kettle does not switch on 

(inner illumination is off)

No electric power supply

Connect the appliance to 

a  properly  working  electric 

socket

Early switch-off

There is scale on the heat-

ing element

Descale the heating element 

(see ‘Cleaning and Mainte-

nance’)

Kettle switches off in a few 

seconds

There is no water in the 

kettle, boil-dry protection 

system has gone off

Unplug the appliance, let it 

cool down. Fill the kettle up 

above MIN (0.5 L) mark

In case you didn’t manage to eliminate the defects, please, refer to the authorized 

service centre.