Profi Cook PC-WKS 1107 G - Инструкция по эксплуатации - Страница 35

35

PC-WKS1107G_IM 

05.04.16

• 

This appliance is used for heating and boiling water. Never use to 

heat up other fluids or foodstuffs.

• 

Only use the appliance in a dry, indoor area. It is intended for do

-

mestic use and similar areas of use such as e.g.

 -

In staff kitchens in shops, offices and other commercial areas;

 -

By guests in hotels, motels and other accommodation facilities.

It is 

not

 intended for use in farm accommodation or Bed & Breakfast 

establishments.

• 

The following symbols are on the product:

 CAUTION:

Do not immerse the device into water for cleaning. Please follow 

the instructions as stipulated in the chapter “Cleaning”.

Overview of the Components

1 Spout

2  Contact area for closing the lid

3 Lid

4  Button for opening the lid

5  Handle

6  Water level indicator

7  On / Off switch

8 Base

Packaging Contents

1x Water kettle

1x Base

Unpacking the Device

1. 

Remove the device from its packaging.

2. 

Remove all packaging materials such as films, 

padding, cable holders, and cardboard.

3. 

Check the packaging contents for completeness.

4. 

Check the device for any transport damage in order 

to avoid hazards.

NOTE:

If there is any visible transport damage, contact your 

dealer immediately. Do not operate the device if 

damaged!

Notes on Use

Preparation

Before using for the first time, boil fresh water at least 

three times in the appliance. Use only water without 

any additives or ingredients.

Mains Lead

Completely unwind the length of mains lead that you 

require from the bottom section of the base. Please 

ensure that the mains lead does not become tangled 

up.

Electrical Connection

Check whether the electrical voltage that you intend to 

use is the same as that of the appliance. Details are to 

be found on the label on the base.

Connected Wattage

The total power consumption of this device can be up 

to 2200 W. With this connected load a separate supply 

line protected by a 16 A household circuit breaker is 

recommended.

 CAUTION: Overload!

• 

If you use extension leads, these should have a 

cable cross-section of at least 1.5 mm².

•  Do not use any multiple sockets, as this device is 

too powerful.