Oursson EK1732W/IV - Инструкция по эксплуатации - Страница 9

9

UTILIZATION

To  accelerate  the  cooling  of  the  heating 

element, do not fill kettle with cold water. This 

may damage the heating element.

Hard water can leave scale in the kettle. Use special 

cleaners for descaling. Follow the instructions of the used 

detergent. Do not use abrasive or harsh cleaners.

•  Fill the kettle halfway with water.

•  For every 2 cups of water, add 6 tablespoons of white 

vinegar 8%. 

•  Bring to a boil. 

•  Repeat the procedure if necessary. 

•  Unplug it. 

•  Allow the kettle to cool and rinse it twice with cold 

water.

•  Wipe the outside of the kettle with a clean, soft, 

damp cloth. In order to prevent electrical shock do 

not immerse the entire product or the wires into 

the water.

•  Thoroughly dry all the parts of the device.

BEFORE FIRST USE:

•  Wash the inner surface of your new kettle with the use 

of non-abrasive cleaners. Dry the kettle. Wipe the kettle 

with a clean dry cloth.

•  Boil the maximum amount of water in a safe manner as 

described in the previous section. Monitor for no leaks, 

sparks, melting of body, stand, excessive heating of 

the power cord, plug, and burning smell during first two 

boiling.

•  Boiled water from the first two boiling is not recom-

mended to use in food. You can use it for everyday 

needs.

The  kettle  is  equipped  with  protection  from 

switch-on without water. If you turn on the kettle 

with no water or less then MIN mark, the device 

will  turn  off  after  a  few  seconds.  After  cooling 

the  heating  element,  the  kettle  will  get  back  to 

working condition. Clicking sounds made by the 

kettle, indicate the reset of thermostat.

Kettle is designed only for heating clean drinking water.

cLEANINg AND  mAINTENANcE, 

Рiс. D

While  utilizing  the  kettle,  the  heating  element 

can  change  the  color,  but  that  will  not  affect 

the kettle’s work.

OPERATION ORDER:
Boiling the water:

1. 

Remove the kettle from the base, open the lid (Pic. C-2), 

and fill it with water. 

2.  Close the lid and put the kettle on the base. Plug it in. 

3. 

Push   button down. Water will heat up.

After boiling the water, the kettle will automatically turn off. 

Turning off the kettle

There are two ways of turning off the kettle:

•  Push   button up, when the device is working;

•  When the kettle is working, remove it from the stand.

For information on product certification, see http://www.oursson.com or ask seller for a copy.

PRODUcT cERTIFIcATION

*

Products should be stored in dry, ventilated warehouses at temperatures below

 - 25°С.

Reparation  must  be  performed  only  by  a  qualified  personnel  authorized  by  OURSSON AG  service 

center.

Specifications

Model

EK1732W

Power consumption, W

max 2200

Rated voltage

220-240V~; 50-60 Hz

Level of protection

I

Storage and transportation temperature

from -25°C to +35°C

Operating temperature

from +5°C to +35°C

Humidity requirements

15-75%

Dimensions, mm 

222x153x245

Weight, kg

1,18

Capacity, L

1,7

Company OURSSON AG expresses great appreciation to 

you for choosing our products. We have done everything 

possible so that this meets your needs, and the quality 

corresponds to the best world standards. If your OURSSON 

branded product will need maintenance, please contact one 

of the authorized service center (hereinafter - ASC). A com-

plete list of ASC and their exact addresses can be found on 

the website www.oursson.com.

Warranty obligations OURSSON Ag:

1. 

Warranty obligations OURSSON AG, provided ASC 

OURSSON AG, apply only to models designed 

OURSSON AG for the production or supply and sale wi-

thin the country where the warranty service is provided, 

purchased in this country, certified for compliance with 

the standards of this country, and also marked the with 

official marks of conformity.

SERVIcINg