MARTA MT-1088 - Инструкция по эксплуатации - Страница 7

7 

OPERATION 

BOILING WATER 

1.Remove the unit from base. 2.Open the cover. 3.Fill the kettle with your desired amount of water, but not less than MIN line. Do not fill above the MAX line.  4.Close the lid.  5.Place the kettle on base, 
ensuring that it is correctly engaged. 6.Connect cord to power outlet and switch unit ON by pressing “On/Off” button; the indicator inside lights up in red. 7.The kettle will switch off automatically when 

water has come to a boil, the indicator in the kettle will turn off and two beeps sounds. 

HEATING WATER TO SELECTED TEMPERATURE 

Place the kettle onto the power base, press "+/-" button to select desired water temperature (50

，

 70

，

 80 or 90°C

）

, after select it, its corresponding indicator lights on. Then press “On/Off” button, kettle 

will start to work and heat the water to the selected temperature. When finished kettle will switch off automatically, all the indicators turn off and two beeps can be heard. While working one of 4 color 
lights will glow inside of kettle: - Green color while heating up to 50°C, Blue to 70°C, Purple to 80°C, Lite green to 90°C.  

KEEP WARM MODE 

This mode allows you to heat up water and keep it warm for 30 minutes. 

Put the kettle onto the power base, press "+/-" button to select your desired keep-warm temperature (50

，

 70

，

 80 or 90°C

）

, after select it, its corresponding indicator lights on. Then press and 

hold

“On/Off” button for 3 seconds, the kettle will enter into keep-warm mode. When water reaches the selected temperature, one beep sounds and kettle will enter into the keep-warm condition; the 
indicator on control block keeps blinking in a cycle of one time/second. After keeping warm for 30 minutes, the kettle will shut off automatically and all the indicators will turn off. Press “On/Off” button to 

turn off KEEP WARM MODE if necessary. 
 

To stop boiling, heating or keep warm mode, press ON/OFF button. 

After use, unplug and empty unused water. Ensure kettle is switched off before removing from base. Heating can be stopped at any time by the operating the switch. As a safety feature, the unit may 

not start immediately after shutting off. Please allow 15 to 20 seconds for kettle to cool down before switching on again. If kettle ever boils dry, please wait 15 minutes for unit to cool before refilling with 
cold water. The safety cut-off will automatically reset during this time. Do not open lid when in operation. Steam escaping from the spout is hot. This appliance is only suitable for heating water; do not 

use any other liquids. A minimum of 0.5L of water must be used to prevent overheating. 

CLEANING AND MAINTENANCE 
CLEANING 



Unplug unit before cleaning and allow unit to cool down.  



Wipe the exterior of kettle with a soft cloth. Do not use abrasive scouring pads or cleaning powders as they may scratch the surface.  



Due to scale build up, it is best to de-scale your kettle weekly. It is recommended to use Citric Acid for de-scaling. If Citric Acid is not available, you can use the juice of 1 lemon. Fill kettle halfway 

with Citric Acid/lemon and water mixture. Allow the unit to boil the solution two to three times. Rinse clean and wipe with a soft cloth. 

SPECIFICATION 

Power supply 

Power 

Capacity 

Net weight  / Gross weight 

Package size (L х W х H) 

Producer: 

Cosmos Far View International Limited 

Room 701, 16 apt, Lane 165, Rainbow North 
Street, Ningbo, China             Made in China 

230 V ~ 50 Hz

1850 - 2250 W 

1.7 l 

0,93 kg / 1,24 kg

210 х 180 х 235 mm

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)  

Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th 
characters indicate the month, the 6th and 7th indicate the year of device production. 

Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device. 

Current information about service centers is available on the website http://multimarta.com/