Kenwood JK60 - Инструкция по эксплуатации - Страница 6

key

lid

on/off switch

neon light

water level gauge

scale filter

2 cups

2 spoons

dual voltage selector

cord clip

to use your travel jug kettle

1 Remove the cups and spoons from

the kettle.

2 Select the required voltage by

turning the selector control 

.

Always check that you have
selected the correct voltage
before using the kettle.

3 Fill it through the spout or lid. The

water level must be between “MAX”
and “MIN” (1 cup/approx. 200mls).

4 Check the lid is closed. 
5 Plug in and switch on. The neon will

come on.

6 Your kettle will boil and switch off

automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.

7 Always unplug the kettle after use.

●

Take care when using the cups and
do not overfill above the inner rim
(approx. 200mls).

●

Your kettle is fitted with a scale filter
to hold back limescale particles.

●

If you find drops of water under your
kettle, don’t worry - it is just
condensation.

boil-dry protection

●

If you switch on with too little water,
your kettle will cut out automatically.
Switch off and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.

approximate boiling times

220/240 volts approx 5 minutes for
450 mls (maximum)
110/120 volts approx 5 minutes 40
seconds for 450 mls (maximum)

care and cleaning

●

Before cleaning, unplug your kettle
and let it cool down.

●

The cups and spoons can be placed
in the kettle for compact storage.

●

Wrap the cord around the kettle and
secure using the cord clip 

.

the outside

●

Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the plastic surfaces.

the inside

●

Wipe with bicarbonate of soda on a
damp cloth. Rinse thoroughly.

●

Even though your kettle comes with
a scale filter, you still need to clean
the inside (and the filter) regularly.

3