HOTTEK HT-960-002 - Инструкция по эксплуатации - Страница 11

ENG

11

• 

Before switching on the kettle, make sure the cover is closed properly. 

Never open the cover in the water heating process.

• 

Do not handle the kettle with wet or damp hands.

• 

The  kettle  is  heated  to  a  high  temperature.  Be  careful  and  not  to  get 

burned with boiling water or steam. Do not touch any parts of the kettle, 

except for the handle and switch. Before you take the handle, make sure 

that the kettle cover is closed securely.

• 

Be careful when you open and close the cover of hot kettle.

• 

Before switching on the kettle, check the amount of water in it. The wa

-

ter level is displayed on the scale on the kettle body.

• 

The water level has not to be below the minimum point and be above the 

maximum point. If the water level is above the maximum point, boiling 

water can splash out.

• 

Never operate the kettle without water.

• 

To avoid danger, do not use the kettle near flammable or explosive vapors.

• 

Do not leave the kettle plugged in unheated premises at low tempera

-

tures. At temperatures below freezing, the thermostat can switch on and 

thereby to switch on the kettle.

• 

Installation of this appliance is not provided, since it is delivered ready 

for service.

•  The special transportation regulations do not apply to this appliance. 

When transporting the unit, use the original packaging. When transport

-

ing, avoid drops, shocks and other mechanical effects on the appliance, 

as well as direct influence of rain and aggressive medium.

•  The appliance sale has to be carried out in accordance with the current 

legislation of the participating countries of the Customs Union.

Overview of the component parts

1. Body of the kettle
2. Nose and filter 
3. Kettle cover
4. Device to open the cover                                                 
5. Switch “O/I” 
6. Water level scale

7. Appliance stand with the cable winding