Bosch TWK 3A051 - Инструкция по эксплуатации - Страница 10

8

en

Congratulations on purchasing this 

Bosch appliance.

You have acquired a high-quality 

product that will bring you a lot of 

enjoyment. 

Parts and operating 

controls

1

  Kettle (with water level indicator)

2

  Lid with lock

3

O / I

 ON/OFF switch, illuminated

4

  Limescale filter (removable)

5

 Base

6

  Cable tidy

Important: 

Use the kettle 

1

 only with its 

included base 

5

.

● 

Only fill the kettle with water.

 Milk and 

instant beverages will burn and damage 

the appliance. Never operate the kettle 

1

 without water and do not overfill it; 

observe the 

min

 and 

max

 markings. If 

the kettle is too full, the water will boil 

over! 

Before using  

for the first time

● Remove any stickers or film.

●

Unroll the right amount of cable from the 

cable tidy 

6

 and plug it in.

●

Fill the kettle 

1

 with water. Bring the water 

to a boil and discard it. Repeat the proce-

dure. This will make sure that the kettle is 

clean for normal use.

●

When the water comes to a boil for the 

first time, add a tablespoon of white 

vinegar.

Boiling water

●

Remove the lid 

2

 and fill the kettle 

1

 with 

fresh water through the opening or spout.

●

Read the quantity on the water level indi-

cator. Do not fill with less than 0.25 litres 

or more than 1 litres of water!

●

Put on the lid 

2

 at the 

 mark and twist 

to 

 to lock it in place. 

●

Press down the 

O / I

 ON/OFF switch 

3

; 

the switch lights up. The water is heated.

●

The kettle switches off automatically once 

the water has boiled.

The appliance can also be switched off at 

any time by pulling up the 

O / I

 ON/OFF 

switch 

3

.

Warning:

 If you remove the kettle 

1

 from 

the base and replace it before the heating 

process is over, the kettle will not continue 

to heat the water. 

N.B.: 

Only operate the kettle with the lid 

2

closed and the limescale filter 

4

 inserted, 

otherwise the kettle will not switch off.

For physical reasons, the base 

5

 may 

collect some condensation water. This is 

normal; it does not mean that the kettle 

1

leaks.

After boiling, let the kettle cool down for 

5 minutes before refilling it with water.

Do not turn on the appliance if the kettle 

1

is empty, otherwise the overheat control will 

engage and the appliance will switch itself 

off automatically.