Atlanta ATH-2437 - Инструкция по эксплуатации - Страница 6

6

INSTRUCTION MANUAL

4.  Tightly  close  the  top  of  the  kettle  otherwise  the  kettle  won’t  switch  off  when 
boiling. 
5.  Put the kettle on the base plugged in. The design of the kettle makes it possible 
to put it on the base from any side.  
6.  Push ON pushbutton (С). Operating indicator is ON (G).
7.  Wait till water is boiling. The kettle will switch off automatically. Boiling process 
may  be  stopped  manually  at  any  time.  In  order  to  make  repeated  boiling,  it  is 
necessary  to  wait  a  while,  till  the  kettle  get  cold  a  little  and  heat-sensing  device 
arrives to home position.   
8.  Don’t  open  the  top  in  the  process  of  boiling  and  immediately  after  in  order  to 
avoid thermal injury.

NOTES

1.  Never fill the kettle with any liquid except water.  
2.  Be money-saving: don’t boil more water than you need. This will reduce power 
consumption and increase the operating life of the kettle.   
3.  Condensate may appear in the kettle in the course of operation.  
4.  Never heat the kettle on gas or electric stove.  
5.  The kettle shall be used only with the base completed with the supply.   
6.  The manufacturer reserves the right to make change in the kettle’s design.  

CLEANING AND CARE
 
•  The kettle must be cleaned regularly in order to remove calciferous sediments. 
A bulk of sediments on a heating element can cause a breakage of the kettle.
•  Plug out the kettle and let it cool down, then clean it with a wet cloth using soda. 
Do  not  use  reactive  and  abrasive  detergents  as  they  can  damage  a  surface  of  the 
kettle. 
•  Do not use tools when cleaning the kettle. 
•  The kettle must be thoroughly washed after cleaning.
•  Never put the device into water or another liquid.

ENVIRONMENTAL PROTECTION 
The old devices are the package of the technical materials; therefore 
they can not be recovered with the domestic waste! On that reason, 
please,  support  us  in  the  resources  saving  and  environmental 
protection and return the unit to the recycling center (if applicable).