Блендеры VITEK VT-8514 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
ENGLISH
TABLE BLENDER VT-8514
The table blender is intended for chopping
products, mixing different ingredients or
making cocktails.
DESCRIPTION
1.
Measuring cup
2.
Blender bowl lid
3.
Blender bowl
4.
Chopping knives
5.
Motor unit
6.
Operation mode switch «P-0-1-2»
7.
Non-slip feet
SAFETY MEASURES
Read this instruction manual carefully before
using the unit and keep it for the whole unit
operation period.
Use the unit for intended purposes only, as
specified in this manual. Mishandling of the
unit may lead to its breakage and cause harm
to the user or damage to his/her property.
•
Before using the unit for the first time,
make sure that the voltage in your mains
corresponds to the voltage of the unit.
AT TENTION! Continuous operation time
of the blender should not exceed 3 min-
utes; then switch the unit off and let it
cool down to room temperature for at
least 10 minutes.
•
Do not use the unit outdoors.
•
Place the unit on a flat steady surface.
•
Use only the removable parts supplied
with the unit.
•
Always unplug the unit before cleaning or
if you are not using it.
•
The knives’ cutting edges are very sharp
and dangerous. Handle the knives very
carefully when dismantling the unit
or removing processed food from the
blender bowl and during cleaning!
•
In case the knives suddenly stop rotating,
unplug the unit before removing the ingre-
dients which block the knives’ rotation.
•
Do not overfill the blender bowl with prod-
ucts and watch the level of liquids.
•
Remove products and pour out liquids
from the blender bowl only after complete
stop of the knives, after you switch off and
unplug the unit.
•
Put the products into the blender bowl
before the unit is switched on. Do not
switch the unit on without food in the bowl.
•
Cool down hot products before using the
unit.
•
Before using the unit, make sure that the
blender bowl and the blender bowl lid are
set properly. Do not switch the unit on if
the blender bowl lid is not installed.
•
Do not touch the rotating parts of the unit.
Do not let hair or free hanging clothes get
into the rotation area of the knife.
•
When disconnecting the power plug from
the mains, do not pull the cord, but hold
the plug with your hand.
•
Do not let the power cord hang from the
edge of the table and make sure it does
not touch hot surfaces or sharp edges of
furniture.
•
Do not touch the power plug with wet
hands.
•
Do not leave the operating unit unat-
tended.
•
Do not use the unit near a kitchen sink; do
not expose the unit to moisture.
•
Do not use the unit in places where aero-
sols are sprayed or highly flammable liq-
uids are used.
•
Do not use the unit next to heat sources or
open flame.
•
To avoid electric shock, do not immerse
the power cord, the power plug and the
motor unit in water or any other liquids.
•
Do not allow children to touch the motor
unit and the power cord during the blender
operation.
•
Do not leave children unattended to pre-
vent using the unit as a toy.
•
During the unit’s operation and breaks
between operation cycles, place the unit
out of reach of children.
•
The unit is not intended for usage by
physically or mentally disabled persons
(including children) or by persons lack-
ing experience or knowledge if they are
not under supervision of a person who is
IM VT-8514.indd 3
01.11.2018 17:15:38
