VITEK VT-3407 BK/W - Инструкция по эксплуатации - Страница 5

Блендеры VITEK VT-3407 BK/W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 28
Загружаем инструкцию
background image

5

ENGLISH          

– 

To avoid damaging the blades, do not pro-
cess  too  solid  products  such  as  cereals, 
rice, spices, coffee beans, cheese, frozen 
products. 

– 

When you use the blender attachment and 
the products are hard to chop, add some 
water, if it is possible. 

USING THE WHISK 

Use  the  whisk  attachment  (10)  only  to  beat 
cream,  make  biscuit  dough  or  for  mixing  ready 
desserts.

WARNING:  Before  assembling  make  sure 
that  the  power  plug  is  not  inserted  into  the 
mains socket.

 •

Insert the whisk (10) into the gear (9).

 •

Insert  the  whisk  gear  (9)  into  the  motor  unit 
(2),  and  turn  it  counterclockwise  until  bump-
ing.

 •

Insert the power plug into the mains socket.

 •

Put the whisk (10) into the bowl with products.

 •

Set  the  required  operation  speed  using  the 
control knob (5).

 •

To  switch  the  blender  on,  press  and  hold  the 
button (4). Use this operation mode for mixing 
liquid products.

 •

If  you  press  and  hold  the  button  (3),  the  unit 
will operate at maximum rotation speed.

 •

After you finish using the unit, take the power 
plug  out  of  the  socket,  disconnect  the  whisk 
(10)  from  the  gear  (9)  and  disconnect  the 
gear  (9)  from  the  motor  unit  (2)  turning  it 
clockwise.

Attention!

– 

  Do  not  use  the  whisk  (10)  to  make  tight 
dough.

– 

Products  should  be  put  into  the  bowl 
before the unit is switched on. 

USING THE MINI CHOPPER

The  chopper  is  used  to  chop  meat,  cheese, 
onion,  herbs,  walnuts,  almond,  vegetables  and 
fruit.

Attention! 
Do not chop very solid products, such as nut-
megs, coffee beans, cereals and ice.

Before you start chopping

– 

Cut meat, cheese, onion, vegetables and fruit 
into cubes approximately 2x2 cm in size.

– 

Remove stems of herbs, peel the nuts.

– 

Remove  bones,  sinews  and  cartilage  from 
meat.

– 

To  achieve  the  best  results  refer  to  the  table 
below.

Product type

Weight, g.

Approximate 
cooking time, 
seconds

Onion (cut 
into several 
pieces)

60

4-8

Soft fruit

100

10

Garlic

50

4-8

Bread 
(dried toast)

15

12

Cheese

30

12

Nuts

30

12

Eggs

80

8

Meat

80

8-12

Chopping
Caution: the knife is very sharp! Always hold 
the knife by the upper plastic end.

 •

Place  the  chopper  bowl  (6)  on  a  flat  stable 
surface.

 •

Set the chopping knife (7) on the axis of chop-
per bowl (6).

 •

Put the products into the chopper bowl (6).

Note:

– 

Do  not  switch  the  unit  on  when  the  chopper 
bowl (6) is empty.

– 

Put the lid (8) on the chopper bowl (6). 

– 

Install the motor unit (2) on the geared lid (8) 
and rotate it clockwise until it is fixed.

– 

To  connect  the  unit  to  the  mains,  insert  the 
power cord plug into the mains socket. 

– 

Set  the  required  speed  with  the  control  knob 
(5).

– 

To  switch  the  blender  on,  press  and  hold  the 
button (4). 

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-3407 BK/W?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"