VITEK VT-3404 BK - Инструкция по эксплуатации - Страница 3

Блендеры VITEK VT-3404 BK - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 44
Загружаем инструкцию
background image

3

ENGLISH          

BLENDER SET 

The  blender  set  is  intended  for  chopping,  mixing  and 
beating products.

Description

1.  Rotation speed control knob
2.  ON button “I”
3.  Turbo mode button “II”
4.  Motor unit
5.  Blender attachment
6.  Whisk gear
7.  Whisk for beating/mixing of liquid products
8.  Pusher for cleaning of the cubic attachment grid
9.  Pusher 
10. Processing bowl geared lid
11.  Cubic attachment driving shaft
12. Cubic attachment knife
13. Attachment with removable cubic grid
14. Locks 
15. Cubic grid
16. Lock button of the processing bowl lid
17. Processing bowl
18. Shredding/slicing disc
19. Processor chopping knife
20. Processor driving shaft
21. Measuring cup lid
22. Measuring cup

Safety measures

Before  using  the  unit,  read  these  instructions  carefully 
and keep them for future reference.
Use  the  unit  according  to  its  intended  purpose  only, 
as  it  is  stated  in  this  user  manual.  Mishandling  the  unit 
can lead to its breakage and cause harm to the user or 
damage to his/her property. 

 

Before connecting the unit to the mains, make sure 
that the voltage specified on the unit corresponds to 
your home mains voltage. 

 

The blender set allows quick and effective operation, 
but  continuous  operation  time  should  not  exceed 
1  minute  while  using  the  blender  attachment  and 
20-30 seconds while chopping products in the pro-
cessor.  Make  at  least  a  two-minute  break  between 
operation cycles.

 

Cool  down  hot  products  before  using  the  blender 
attachment.

 

Do not use the unit outdoors.

 

Use only the accessories supplied.

 

Before  using  the  unit  for  the  first  time,  wash  all  the 
removable parts that will contact food thoroughly.

 

Before  using  the  unit,  make  sure  that  all  parts  are 
set properly.

 

Place the bowl on a flat, stable surface.

 

Products should be put into the bowl before the unit 
is switched on.

 

Do  not  overfill  the  chopper  bowl  with  products  and 
watch the level of poured liquids.

 

The  blade  of  the  chopping  knife  is  very  sharp  and 
can  be  dangerous.  Handle  the  chopping  knife  very 
carefully!

 

If rotation of the chopping knife is hindered, unplug 
the  unit  and  carefully  remove  products  that  prevent 
blade rotation.

 

Remove products and pour out liquids from the bowl 
only after complete stop of the knife.

 

Do not touch rotating parts of the unit. Keep hair or 
clothes  edges  away  from  the  blender  blades  rotat-
ing zone.

 

Do  not  leave  the  operating  unit  unattended.  Always 
unplug the unit before cleaning or if you do not use it.

 

Do not use the unit near hot surfaces (such as gas or 
electric stove, oven).

 

Provide  that  the  power  cord  does  not  touch  sharp 
edges of furniture and hot surfaces.

 

Do not pull the power cord and do not twist it.

 

Do not touch the plug with wet hands.

 

Do not use the unit if the power cord is damaged.

 

To  avoid  the  risk  of  electric  shock  or  fire,  do  not 
immerse  the  unit,  the  power  cord  and  the  plug  into 
water  or  other  liquids.  If  the  unit  was  dropped  into 
water:

–  do not touch the water;
–  unplug the unit immediately, and only then take you 

may it out of the water;

–  apply to an authorized service center for testing and 

repairing the unit.

 

For children safety reasons, do not leave polyethyl-
ene bags, used as a packaging, unattended. 

Attention! 

Do not allow children to play with polyethyl-

ene bags or packaging film.

 Danger of suffocation!

 

Do not allow children under 8 years of age to touch 
the  motor  unit  body,  the  power  cord  or  the  power 
plug during operation of the unit.

 

Do not allow children under 8 years of age to use the 
unit as a toy. 

 

Close supervision is necessary when children  under 
8 years of age or disabled persons are near the oper-
ating unit.

 

This unit is not intended for usage by children under 
8 years of age. 

 

Children  aged  8  and  over  as  well  as  disabled  per-
sons  can  use  this  unit  only  under  supervision  of  a 
person who is responsible for their safety, if they are 
given all the necessary and understandable instruc-
tions  concerning  the  safe  usage  of  the  unit  and 
information about danger that can be caused by its 
improper usage.

 

Do not switch the unit on without food inside.

 

To  avoid  damages,  transport  the  unit  in  original 
package only.

 

Keep the unit out of reach of children under 8 years 
of age.

THE  UNIT  IS  INTENDED  FOR  HOUSEHOLD  USAGE 
ONLY

BEFORE USING THE UNIT
Note: 

After  unit  transportation  or  storage  at  low  tem-

perature, it is necessary to keep it for at least two hours 
at room temperature before switching on.

VT-3404.indd   3

30.10.2013   10:10:49

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-3404 BK?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"