Блендеры Sinbo SHB 3107 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 9 -
Warning: While operating chopping blade, do not run this appliance continuously more than 15secs per
cycle.
4. How to use the Whisk.
- Place the egg white into the Blending cup.
- Assemble whisk into Main-unit by pressing, it is installed properly by hearing a click sound.
- Connect the appliance into power source.
- Press the Speed-button or Turbo-button, the appliance will start working.
Warning: While operating Whisk, do not run this appliance continuously more than 1 min per cycle.
NOTE: When operating the appliance, make sure that there is slack in the power cord. Never operate
the appliance in a location where the power cord can get snagged on kitchen units, or appliances or
utensils. The power cord should lie outside your operating hand.
AFTER USE
Switch the main unit OFF, lift the main unit out of the mixture and switch off at the mains before
unplugging the unit. Change speed to lowest as a safety measure. Unplug the appliance. Remove the
attached accessories.
Cleaning and Maintenance
1. When cleaning the motor unit, if the motor is warm, allow it to cool down first. Wipe the outer surface
of the motor unit with a damp cloth. Never use abrasive cleaner or scouting creams. Never immerse
the motor unit in water. Wipe any excess food particles from the power cord. Dry all components
thoroughly.
2. Wash the blender stem under running water, without the use of abrasive cleaners or detergents.
3. Do not use a pointed or sharp object to remove items of food lodged in the blade bush any debris out
with a plastic brush.
4. Do not immerse the stem in water because over time the lubrication on the bearings will deteriorate.
5. After cleaning the blender stem, place it upright to drain.
6. Blades are very sharp, handle with care. When all components are dry, reassemble the blender.
7. After cleaning, coil the cable loosely around the motor unit, and stow the blender out of direct sunlight
and out of the reach of children.
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipments to
an appropriate waste disposal center
Made in China
