Philips HR2090 - Инструкция по эксплуатации - Страница 10

  2 

 Place the lid on the blender jar.

Close the lid by pushing it down firmly.

  3 

 Insert the measuring cup into the opening in the lid.

  4 

 Select a speed by turning the control knob or push one of the quick-

select buttons (see section ‘Control knob’).

Do not let the appliance run for more than 3 minutes at a time. If you 

have not finished processing after 3 minutes, switch off the appliance and 

let it cool down to room temperature before you let it run again.

  5 

 Always switch off the appliance by setting the control knob to OFF 

before you open the lid.

after using the blender

  1 

 Unplug the appliance.

  2 

 Remove the lid with the measuring cup from the blender jar.

  3 

 Remove the blender jar with the unit interface attached from the 

motor unit.

  4 

 Unscrew the blade unit interface from the bottom of the blander jar.

  5 

 Always clean the removable parts immediately after use.

tips

 - Cut meat or solid ingredients into smaller pieces before putting them 

in the blender jar.

 - Do not process a large quantity of solid ingredients at the same time. 

Process these ingredients in a series of small batches instead.

 - To make tomato juice, cut the tomatoes in four and drop the pieces 

through the opening in the lid onto the rotating blades.

Measuring cup

You can use the measuring cup to measure ingredients or to prepare 

mayonnaise.

,

To prepare mayonnaise, you can punch a hole in the middle of 

the bottom of the measuring cup with a knife or another sharp 

implement to use the measuring cup as a funnel for adding oil when 

preparing mayonnaise. The oil should be added very slowly to obtain 

the right consistency. Let the blender operate at a low speed when 

preparing mayonnaise.

Note: Once you have punched a hole in the measuring cup, it cannot be used 

as a measuring cup anymore.

EnglisH

10