Philips HR1840 - Инструкция по эксплуатации - Страница 11

Tips

◗

If the pulp container is full during processing, switch the appliance
off and wait until the sieve has completely stopped rotating.
Unfasten the clamp and remove the lid. Remove the sieve. Detach
the pulp container from the motor unit by turning it to the right
and remove it. Empty the pulp container and clean the sieve.
Reassemble the juice extractor and switch it on again.

◗

If the juice cup is full during processing, switch the appliance off
and wait until the sieve has completely stopped rotating. Remove
the juice cup and empty it. The maximum content of the juice cup
is 700 ml.

◗

Before processing it is unnecessary to remove thin peels and
skins. Only thick peels (e.g. those of oranges, pineapples or
uncooked beetroots) need to be removed.

◗

Firm fruits that contain a lot of starch, such as bananas, papayas,
avocados, figs and mangoes are not suitable for processing in the
juice extractor. Use the blender to process these fruits.

◗

Always use fresh fruits and vegetables. They contain more juice.

◗

Leafs and leaf stalks of for instance lettuce can also be processed
in the juice extractor.

◗

Apple juice turns brown very quickly.You can slow down this
process by adding a few drops of lemon juice.

◗

The pulp of carrots, beetroots, cabbage or spinach can be used as
the basis for soups, sauces, jam, desserts, ice cream etc. Boil the
pulp and add some herbs. Puree the pulp in the blender.You can
use tomato pulp to make tomato paste.

Cleaning

Cleaning of the appliance, its par ts and accessories is easiest
immediately after use.

Never clean the accessories or the appliance par ts in the dishwasher.

Clean the motor unit with a moist cloth.

Do not use abrasives, scourers, alcohol, etc.

1

Unplug the appliance, detach the used accessories and parts

and clean them in lukewarm, soapy water.

2

Rinse all washed up accessories and parts under a tap.

E N G L I S H

1 1