Moulinex InfinyMix+ LM91HD32 (Высокоскоростной) - Инструкция по эксплуатации - Страница 54

52

Wait for the blender to stop automatically. If you want to stop the blender before the automatic 
end of the program, press on the start / stop button. 
Do not shake the motor unit or the jar when the blender is in use.
When you use the pusher or the middle cap, hold the jar by its handle to avoid it falling.
When the blender is in use, do not use any other accessory than the pusher to avoid damaging 
the jar.

Less than 3 minutes of mixing are enough to blend liquids for most of the recipes

For adding ingredients while blending, remove the middle cap from the lid and add the ingredients 
through the feeder hole. Beware of the risk of spatter.

CAUTION:

 After running one cycle in the blender for the maximum processing time, let the 

blender rest for 1 minute before operating it again.
After using the blender for a maximum of three cycles, stop the appliance and leave to cool to 
ambient temperature (takes about 2 hours).
The appliance is equipped with overload protection. This prevents the motor from being damaged 
by overloading.

If the appliance switches off during operation, proceed as follows :
unplug and leave to cool down for approx.15-20 minutes.

Reconnect the appliance to the power supply and resume blending.

After approx 3 minutes without use, your appliance will start a stand by mode. To switch on you 
appliance, press the Start/ Stop button (G)

ROUGH CHOPPING SMALL QUANTITIES

Accessories used : assembled chopper
Chop in a few seconds by pulsing: peanuts, almonds etc.
Model 1600w : quantity / max time: 140g peanuts/8s or 150g almonds/8s