FIRST FA-5246-4 - Инструкция по эксплуатации - Страница 2

3

ENGLISH

2

NOTES

•  Wash ingredients well and cut into suitable pieces to 

fit into the feeding hole. Add the foods or beverages 

into the jug through the feeding hole. The jug has 

a capacity of 1.5 liters. Do not overload the jug at a 

time. 

•  The Pulse switch offers you fingertip control over 

short food processing jobs. When switch to Pulse, 

the machine will run at high speed.

•  Turn Off to stop the machine.  

NOTE: 

Do not let the machine work with thick mixtures 

or heavy foods. If the motor does not run freely, stop the 

machine and 
 

• add a little liquid or 

• switch to Pulse for a few short bursts or

•  stop blending every few seconds and use a rube 

spatula to clear the sides of the jug and push 

ingredients towards the cutting blades, or 

• reduce the contents in the jug

1.  The appliance is only permitted to use 3min for 

1 time. Before it is used again, it must cool down 

enough.

2.  When finished processing select OFF (0) or release 

from PULSE position. 

Wait until blade has stopped 

rotating before removing lid.

 Unplug the unit 

CLEANING AND MAINTENANCE

NOTE: MAKE SURE THE MACHINE IS OFF AND PLUG IS 

DISCONNECTED FROM OUTLET BEFORE PUTTING ON OR 

TAKING OFF ANY PARTS.
1.  Cleaning is best done immediately after use. Take off 

the jug. 

2.  Particles of food lodging under the blade can be 

easily removed with the aid of a small tooth brush 

(not attached accessory).

WARNING: THE BLADE IS EXTREMELY SHARP. HANDLE 

CAREFULLY. 
3.  Clean the motor housing with a soft damp cloth. 

Do not use abrasive cleaners or scouring pads to 

clean the unit. To clean the jug, add 1/4 teaspoon 

(no more) of liquid detergent to the jug, and fill to 

maximum with warm water. Place the jug on the 

motor housing and pulse for a few seconds, two or 

three times.

4.  Rinse parts under running water. Do not use 

a dishwasher or very hot water. Wipe all parts 

thoroughly before putting them away after use. 

Store the appliance in a dry place. It is recommended 

to store the jug with the lid removed.

CAUTION: NEVER IMMERSE THE MOTOR UNIT OR 

POWER CORD INTO WATER FOR CLEANING.

If any problem has been encountered during use, 

never disassemble the Motor Unit by yourself, there 

are no user serviceable parts inside. Contact only the 

authorized service facility for examination and repair.

TECHNICAL DATA: 

220-240 V ~ 50-60 Hz • 500 W

Environment friendly disposal

You can help protect the environment! Please 

remember to respect the local regulations: 

hand in the non-working electrical equipments to an 

appropriate waste disposal center.

INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

The following basic safety precautions apply when 

using electrical appliances:

•  Read all instructions. 

•  Before use check that the voltage of wall outlet 

correspond to the one shown on the rating plate.

•  Do not operate any appliance with a damaged cord 

or plug or after the appliance malfunctions, or is 

dropped or damaged in any manner. 

Return appliance to the nearest authorized service 

facility for examination, repair or electrical or 

mechanical adjustment.

•  If the supply cord is damaged it must be replaced by 

the manufacturer or a authorized service agent or a 

qualified technician in order to avoid a hazard.

 •  To protect against risk of electrical shock do not put 

in water or other liquid.

•   Close supervision is necessary when any appliance is 

used by or near children.

 •  Unplug from outlet not in use, before putting on or 

taking off parts, and before cleaning.

•  Avoid contacting moving parts. 

•  The use of attachments, including canning jars, not 

recommended by the manufacturer may cause a risk 

of injury to persons.

•  Do not use outdoors

 •  Do not let cord hang over edge of a table or counter.

•  Do not let cord contact hot surface, including the 

stove. 

•  Keep hands and utensils out of container while 

blending to reduce the risk of severe injury to 

persons or damage to the blender. A scraper may be 

used but must be used only when the blender is not 

running. 

 •  To reduce the risk of injury, never place cutter-

assembly blades on base without jar properly 

attached.

•  Unplug the appliance immediately after use.

•  Never let the appliance run unattended.

•  Always operate blender with cover in place.

•  If you use the blender have long time, you must run 

it on 3 minute rest it 10 minute.

• 

Warning: 

never use hot liquids or run the appliance 

empty.

•  Blades are sharp. Handle carefully.

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a 

person responsible for their safety.

•  Children should be supervised to ensure that they 

do not play with the appliance.

•  Appliances shall be potential injury from misuse.

•  The blender is not to be operated with an empty 

blending unit (i.e. without solid or liquid foodstuff ).

•  Do not operate the appliance in dry motion.

•  Do not use for other purpose, it may have injury 

from misuse.

SAVE THESE INSTRUCTIONS!

HOW TO USE THE BLENDER

Before using for the first time, wash all parts and 

attachments in hot soapy water, rinse and dry 

thoroughly.

ASSEMBLE:

1

8

9

2

3

4

5

6
7

1.  Jar cover

2.  Spout

3.  Jar

4.  Motor unit

5.  Switch

6.  Base

7.  Foot

8.  Measure cup

9.  Handle

INSERTING THE JUG

1.  Make sure that the blender is switched off (Switch in 

the ‘0’  setting).

2.  Place the jug ass’y onto the motor block.

CAUTION: NEVER TURN ON THE APPLIANCE UNTIL IT 

IS PROPERLY ASSEMBLED.

HOW TO OPERATE THE CONTROLS

The control dial is conveniently located on the front of 

the base. Rotate the knob clockwise to select a speed:

  1 for Low

  2 for High

For instant on and off control, use the PULSE (P) button 

by rotating knob counterclockwise.

ENGLISH