FIRST FA-5241-3 - Инструкция по эксплуатации - Страница 2

2

3

ENGLISH

CAUTION: NEVER TURN ON THE APPLIANCE 

UNTIL IT IS PROPERLY ASSEMBLED.

HOW TO OPERATE THE CONTROLS

The control dial is conveniently located on the front 

of the base. Rotate the knob clockwise to select a 

speed:

  1 for Low

  2 for High

For instant on and off control, use the PULSE (P) 

button by rotating knob counterclockwise.

NOTES

•  Wash ingredients well and cut into suitable 

pieces to fit into the feeding hole. Add the foods 

or beverages into the jug through the feeding 

hole. The jug has a capacity of 1.5 liters. Do not 

overload the jug at a time. 

•  The Pulse switch offers you fingertip control 

over short food processing jobs. When switch to 

Pulse, the machine will run at high speed.

•  Turn Off to stop the machine.  

NOTE: 

Do not let the machine work with thick 

mixtures or heavy foods. If the motor does not run 

freely, stop the machine and 
  • add a little liquid or 

  • switch to Pulse for a few short bursts or

  •  stop blending every few seconds and use a 

rube spatula to clear the sides of the jug and 

push ingredients towards the cutting blades, or 

  • reduce the contents in the jug
1.  The appliance is only permitted to use 2min for 

1 time. Before it is used again, it must cool down 

enough.

2.  When finished processing select OFF (0) or 

release from PULSE position. 

Wait until blade 

has stopped rotating before removing lid.

Unplug the unit 

CLEANING AND MAINTENANCE

NOTE: MAKE SURE THE MACHINE IS OFF 

AND PLUG IS DISCONNECTED FROM OUTLET 

BEFORE PUTTING ON OR TAKING OFF ANY 

PARTS.
1.  Cleaning is best done immediately after use. 

Take off the jug. 

2.  Particles of food lodging under the blade can be 

easily removed with the aid of a small tooth brush 

(not attached accessory).

WARNING: THE BLADE IS EXTREMELY SHARP. 

HANDLE CAREFULLY. 
3.  Clean the motor housing with a soft damp cloth. 

Do not use abrasive cleaners or scouring pads to 

clean the unit. To clean the jug, add 1/4 teaspoon 

(no more) of liquid detergent to the jug, and fill to 

maximum with warm water. Place the jug on the 

motor housing and pulse for a few seconds, two 

or three times.

4.  Rinse parts under running water. Do not use 

a dishwasher or very hot water. Wipe all parts 

thoroughly before putting them away after 

use. Store the appliance in a dry place. It is 

recommended to store the jug with the lid 

removed.

CAUTION: NEVER IMMERSE THE MOTOR UNIT 

OR POWER CORD INTO WATER FOR CLEANING.

If any problem has been encountered during use, 

never disassemble the Motor Unit by yourself, there 

are no user serviceable parts inside. Contact only 

the authorized service facility for examination and 

repair.

TECHNICAL DATA: 

220-240V ~ 50/60Hz • 1000W

Environment friendly disposal

You can help protect the environment! Please 

remember to respect the local regulations: 

hand in the non-working electrical equipments to an 

appropriate waste disposal center.

INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

The following basic safety precautions apply when 

using electrical appliances:

•  Read all instructions. 

•  Before use check that the voltage of wall outlet 

correspond to the one shown on the rating plate.

•  Do not operate any appliance with a damaged 

cord or plug or after the appliance malfunctions, 

or is dropped or damaged in any manner. 

Return appliance to the nearest authorized 

service facility for examination, repair or electrical 

or mechanical adjustment.

•  If the supply cord is damaged it must be replaced 

by the manufacturer or a authorized service 

agent or a qualified technician in order to avoid a 

hazard.

 •  To protect against risk of electrical shock do not 

put in water or other liquid.

•   Close supervision is necessary when any 

appliance is used by or near children.

 •  Unplug from outlet not in use, before putting on 

or taking off parts, and before cleaning.

•  Avoid contacting moving parts. 

•  The use of attachments, including canning jars, 

not recommended by the manufacturer may 

cause a risk of injury to persons.

•  Do not use outdoors

 •  Do not let cord hang over edge of a table or 

counter.

•  Do not let cord contact hot surface, including the 

stove. 

•  Keep hands and utensils out of container while 

blending to reduce the risk of severe injury to 

persons or damage to the blender. A scraper may 

be used but must be used only when the blender 

is not running. 

 •  To reduce the risk of injury, never place cutter-

assembly blades on base without jar properly 

attached.

•  Unplug the appliance immediately after use.

•  Never let the appliance run unattended.

•  Always operate blender with cover in place.

•  If you use the blender have long time, you must 

run it on 2 minute rest it 3 minute.

• 

Warning: 

never use hot liquids or run the 

appliance empty.

•  Blades are sharp. Handle carefully.

•  This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they have 

been given supervision or instruction concerning 

use of the appliance by a person responsible for 

their safety.

•  Children should be supervised to ensure that 

they do not play with the appliance.

•  Appliances shall be potential injury from misuse.

•  The blender is not to be operated with an empty 

blending unit (i.e. without solid or liquid foodstuff).

•  Do not operate the appliance in dry motion.

•  Do not use for other purpose, it may have injury 

from misuse.

SAVE THESE INSTRUCTIONS!

HOW TO USE THE BLENDER

Before using for the first time, wash all parts and 

attachments in hot soapy water, rinse and dry 

thoroughly.

ASSEMBLE:

1.  Inner cover

2.  Lid

3.  Glass jug

4.  Cup Sealing

5.  Cutting blade

6.  Cup base

7.  Motor block

8.  Rotary switch

9.  Jug assembly

ASSEMBLY OF THE GLASS JUG

1.  Put the sealing ring (4) on the inner edge of the 

blade unit (5).

2.  Put the blade unit (5) with sealing ring into the 

cup base (6).

3.  Mount the glass cup (3) onto the cup base unit 

and tune the cup base unit in clockwise direction 

until it is fixed.

4.  Mount the cup with cup unit onto the base unit. 

5.  After putting the ingredients in the cup, fix the lid 

(2) onto the cup by pressing down.

6.  Insert the inner cover (1) into the opening of the 

lid, and tune it in clockwise direction until it is 

locked.

INSERTING THE GLASS JUG

1.  Make sure that the blender is switched off (Switch 

in the ‘0’ setting).

2.  Place the jug ass’y (9) onto the motor block (7).

ENGLISH