CASO HB 2400 Pro XL - Инструкция по эксплуатации - Страница 30

30 

15.1  Safety information 

  Attention 

Please observe the safety instructions, before cleaning your device 
► The blades are really sharp. Handle them with care. 
► Do not immerse the main device in water. 

15.2  Cleaning  

1.  Unplug the appliance. 

Remove the blades and clean them under running water with a mild detergent. Dry them 
thoroughly and store the blades in the storage section in the base. 
Wipe the main appliance with the blender with a damp cloth and then dry it thoroughly. 

  Please note 

► For quick cleaning, pour warm water with some dish soop in a jar, insert the blender bar 

and let the appliance operate for approx. 10 seconds. 

16 Troubleshooting 

This chapter provides you with important notices with regard to operating the device. 
Observe the following notices to avoid dangers and damages:  

16.1  Security advices 

  Attention 

► Repairs of electrical appliances must be carried out by qualified personnel who are 

trained by the manufacturer. 

► Repairs performed by untrained persons may result in considerable hazards for the user 

and damage the machine. 

16.2  Troubleshooting 

Fault 

To Rectify 

The device does 
not start. 

Please check whether the power plug is properly plugged. 
 

The unit has shut 
down. 

The overheat protection was activated. Pull out power supply plug 
and wait for the motor to cool (about 20 to 30 minutes), then use 
again. 

Please note 

► If above mentioned steps don't solve the problem, please contact your customer 

service. 

► Please clean the device before sending it to customer service.