Braun MR740 cc - Инструкция по эксплуатации - Страница 8

9

English

Our products are engineered to meet the highest 
standards of quality, functionality and design. We 
hope that you thoroughly enjoy your new Braun 
appliance. 

Please read the use instructions carefully and 

completely before using the appliance. 

Caution

The blades are very sharp! Handle blades 
with utmost care in order to prevent 
injuries.

High risk of injury by switching on the appliance 
unintentionally. As this is a rechargeable 
appliance, it is ready for use anytime (when 
charged).
Do not expose the appliance to direct sunlight.
When the blades are blocked remove motor part 
from blender shaft, before removing the food/
blockage.
Before cleaning, remove blender shaft from motor 
part. 
The appliance is constructed to process normal 
household quantities.
This appliance is provided with a special cord set 
with an integrated Safety Extra Low Voltage 
power supply. Do not exchange or manipulate any 
part of it. Otherwise there is risk of electric shock.
Only use the appliance with the charging unit 
supplied. 
The charging unit can remain permanently 
connected to the mains. 
Protect the motor part, the charging unit and 
special cord set against humidity. Motor part and 
power supply of special cord set must no longer 
be used after they have been immersed in water. 
This appliance is not intended for use by children 
or persons with reduced physical or mental 
capabilities, unless they are given supervision by 
a person responsible for their safety. In general, 
we recommend that you keep the appliance out of 
reach of children. Children should be supervised 
to ensure that they do not play with the appliance.
Before use, make sure that charging unit and 
special cord set are not damaged. Braun electric 
appliances meet applicable safety standards. 
Repairs or the replacement of the mains cord 
must only be done by authorised service 
personnel. 
Faulty, unqualified repair work may cause 
considerable hazards to the user.

Description

1 Pilot 

light 

2  Switch release button 
3 On 

switch 

4 Motor 

part

5  Push buttons for releasing the accessories  

•

•

•
•

•

•

•

•

•

•

•

•

•

•

6 Blender 

shaft

7 Beaker
8  Charging unit (incl. cord storage)
9 Special 

cord 

set 

10  Chopper attachment 
 (a) 

Gear 

lid

 (b) 

Blade

 (c) 

Chopper 

bowl

 (d) 

Anti-slip 

base/lid

 (e) 

Ice 

blade

(f)  Ice crusher insert

Charging

The ideal temperature range for charging is between 
15 °C and 35 °C. 
Make sure that the charging unit (8) is located on a 
level surface. Connect the charging unit to the mains 
via the special cord set. 
For charging, place the complete handblender in the 
charging unit (8) – (motor part alone also possible).
The green pilot light confirms that the appliance is 
properly inserted in the charging unit and that it is 
being charged.  

Full charge: ca. 2 hours
Fully charged: the pilot light flashes with longer 
intervals 
Operation time is ca. 20 minutes (depending on 
way of usage)

After every usage, place the appliance back onto 
the charging unit for recharging. This will make sure 
that it is always ready for use with optimum charging 
conditions. You may as well store the appliance on 
the charging unit. Even if not in use for a long period 
of time, the lithium ion batteries implemented main-
tain their charging level to a large extent.  

The batteries are protected against deep discharge. 
A completely discharged appliance has to be 
charged for at least ca. 15 minutes before it can be 
used for an application (e.g. soup). 

Pilot Light

Appliance in 

charging unit 

(connected to the 
mains)

Charging or operation 

conditions

Green flashing

Battery is charging

Green flashing 
(in longer intervals)

Battery is fully charged

•
•

•