Braun HB901AI-MQ9147X - Инструкция по эксплуатации - Страница 14

14

How to Use the Appliance 

Smartspeed Switch for 
Variable Speeds  

One squeeze, all speeds. The more you press, the 

higher the speed. The higher the speed, the faster 

and finer the blending and chopping results.

One handed operation: the Smartspeed switch (3) 

allows you to turn on the appliance and control the 

speed with one hand.

Operating your Hand Blender

First use: Remove the transportation lock from the 

motor part (4) by pulling it at the red strap.

Switching On (A)

The appliance comes with an imode selector (1) 

and a safety button (2) for releasing the 

Smartspeed switch (3). Please follow the instruction 

to start the appliance: 

• 

By pressing the silver part of the top you can 

choose one of the 3 different imodes (high 

speed, low speed, pulse). 

• 

With the help of the 3 modes you can decide how 

to process the food.  The indicator light glows 

white to show the chosen mode.

• 

High speed (1a) gives you the full speed 

available. It is the standard position of the mode.

• 

Low speed (1b) decreases the speed even if you 

press the Smartspeed switch fully.

• 

The pulse mode (1c) can be used to break apart 

larger pieces of food or to control the texture of 

food when chopping. Press the Smartspeed 

switch for short bursts of power.

• 

After choosing the mode, press the safety button 

(2) with your thumb. 

• 

Immediately press the Smartspeed switch and 

adjust to the desired speed.

NOTE: If the Smartspeed switch is not pressed 

within 2 seconds, the appliance cannot be 

switched on for safety reasons. The safety button 

light will flash red. To switch the appliance on, 

start again.

• 

During operation you do not need to keep the 

safety button pressed.

Pilot light

Appliance / Operating status

Safety button light 

Flashing red

Appliance is ready for use.

Safety button 

light o

ff

Appliance is released (switch 

release button is pressed) and 

can be switched on.

Standby mode 

after 10 minutes. 

All lights switch o

ff

.

Device is active again if any 

button is pressed

ActiveBlade Shaft (B)

The hand blender is equipped with an ActiveBlade 

shaft, which enables the knife extend to the bottom 

of the bell. The adjustment is made automatically by 

pressure required in blending tasks, especially 

suited to mix hard foods e.g. raw fruits and

vegetables.

It is also perfectly suited for preparing dips, sauces, 

salad dressings, soups, baby food, as well as 

drinks, smoothies and milkshakes.
For best results, use the highest speed.

Assembly and Operation

• 

Attach the ActiveBlade shaft (6) to the motor part 

until it clicks.

• 

Place the ActiveBlade shaft into the mixture to be 

blended. Then switch the appliance on as 

described above.

• 

Blend ingredients to the desired consistency 

using a gentle up-and-down motion. Depending

on the pressure applied, the ActiveBlade shaft 

will depress and blade will extend.

• 

After use, unplug the hand blender and press the 

EasyClick Plus release buttons (5) to detach the 

ActiveBlade shaft.

Caution

• 

Do not let liquids or ingredients overlap the green 

line of the ActiveBlade shaft.

• 

If using the appliance to purée hot food in a 

saucepan or pot, remove the saucepan or pot

from the heat source and ensure the liquid is not 

boiling. Allow hot food to cool slightly to avoid 

risk of scalding.

• 

Do not let the hand blender sit in a hot pan on the 

cooktop when not in use.

• 

Do not scratch the ActiveBlade shaft over the 

bottom of pans and pots.

• 

Do not operate continuously for longer than 

2 minutes.

• 

Let the appliance cool down for 5 minutes before 

you continue processing.

Recipe Example: Mayonnaise

250 g oil (e.g. sunflower oil)

1 egg and 1 extra egg yolk

1–2 tbsp. Vinegar

Salt and pepper to taste

• 

Place all ingredients (at room temperature) into 

the beaker in the order as above.

• 

Place the ActiveBlade shaft at the bottom of the 

beaker. Blend at maximum speed until the oil starts 

emulsifying.

5722112374_HB901-MQ91-35-38-47 INT.indd   14

01.07.20   13:36