Braun 4200-MQ9027X - Инструкция по эксплуатации - Страница 12

12

Solid green

Appliance is released (switch re-

lease button is pressed) and can 

be switched on.

Solid Red

Early warning about overheating. 

Motor slows down, step by step, 

till shut o

Ɉ

 . Let the device cool 

down. It is ready for use again 

when the pilot light 

Å

 ashes red.

If the maximum speed decreases under high load 
and long running time you can still finish your 
preparation, however you should let the appliance 
cool down afterwards.

How to Use the Appliance 

Smart Speed Switch for 
Variable Speeds  

One squeeze, all speeds. The more you press, the 
higher the speed. The higher the speed, the faster 
and finer the blending and chopping results.

One handed operation: the Smart Speed switch (3) 
allows you to turn on the appliance and control the 
speed with one hand.

Operating your Hand Blender

First use: Remove the transportation lock from the 
motor part (4) by pulling it at the red strap.

Switching On (A)

The appliance comes equipped with a safety button 
for releasing the Smart Speed switch. To safely turn 
it on, follow these points:

• 

Press the safety button (2) with your thumb. The 
Pilot Light will turn solid green.

• 

Immediately press the Smart Speed switch and 
adjust to the desired speed. Note: If the Smart 
Speed switch is not pressed within 2 seconds, 
the appliance cannot be switched on for safety 
reasons. The pilot light will flash red. To switch 
the appliance on, start again with first step.

• 

During operation you do not need to keep the 
safety button pressed.

ActiveBlade Shaft (B)

The hand blender is equipped with an ActiveBlade 
shaft, which enables the knife extend to the bottom 
of the bell. The adjustment is made automatically by 
pressure required in blending tasks, especially 
suited to mix hard foods e.g raw fruits and 
vegetables. 

It is also perfectly suited for preparing dips, sauces, 
salad dressings, soups, baby food, as well as 
drinks, smoothies and milkshakes.

For best results, use the highest speed.

Assembly and Operation

• 

Attach the ActiveBlade shaft (6) to the motor part 
until it clicks.

• 

Place the ActiveBlade shaft into the mixture to be 
blended. Then switch the appliance on as 
described above.

• 

Blend ingredients to the desired consistency 
using a gentle up-and-down motion. Depending 
on the pressure applied, the ActiveBlade shaft 
will depress and blade will extend.

• 

After use, unplug the hand blender and press the 
release buttons (5) to detach the ActiveBlade 
shaft.

Caution

• 

Do not let liquids or ingredients overlap the green 
line of the blending shaft.

• 

If using the appliance to purée hot food in a 
saucepan or pot, remove the saucepan or pot 
from the heat source and ensure the liquid is not 
boiling. Allow hot food to cool slightly to avoid 
risk of scalding.

• 

Do not let the hand blender sit in a hot pan on the 
cooktop when not in use.

• 

Do not scratch the ActiveBlade Shaft over the 
bottom of pans and pots.

Recipe Example: Mayonnaise
250 g oil (e.g. sunflower oil),
1 egg and 1 extra egg yolk,
1–2 tbsp. vinegar,
Salt and pepper to taste

• 

Place all ingredients (at room temperature) into 
the beaker in the order as above.

• 

Place the hand blender at the bottom of the 
beaker. Blend at maximum speed until the oil 
starts emulsifying. 

• 

W ith the hand blender still running, slowly raise 
the shaft to the top of the mixture and back down 
to incorporate the rest of the oil. 
NOTE: Processing time: approx. 1 minute for 
salads and up to 2 minutes for a thicker 
mayonnaise (e.g. for dip).

Whisk Accessory (B)

Use the whisk only for whipping cream, beating egg 
whites, making sponge cakes and ready-mix 
desserts.

Assembly and Operation

• 

Attach the whisk (8b) to the gearbox (8a).

• 

Align the motor part with the assembled whisk 
attachment and push the pieces together until 
they click.

5722112034_MQ9045X_INT_S6-116.indd   12

06.06.16   14:17