Блендеры Bosch MS61B6150 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Avoiding material damage
en
Printed on 100% recycled paper
13
▶
Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶
Never place the appliance on or near hot surfaces.
▶
After switching off, wait until the drive has come to a complete
standstill.
▶
Keep hands, hair, clothing and utensils away from rotating parts.
▶
Never touch the edges of the blades with bare hands.
▶
Process hot food carefully.
▶
Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶
Follow the cleaning instructions.
▶
Clean surfaces which come in contact with food before each
use.
Avoiding
material
damage
Avoiding material damage
Avoiding
material
damage
▶
Do not operate the appliance at no-load.
▶
Never use the blender jug in the mi-
crowave or oven.
Overview
Overview
Overview
1
Speed setting
2
On button
3
Turbo button
4
Release buttons
5
Plastic blender foot or stainless-
steel blender foot
1
6
Lid
1
7
Plastic blender jug
1
8
Whisk
1
2
9
Universal cutter L
1
2
10
Universal cutter XL
1
2
11
"ProPuree" masher attachment
1
2
1
Depending on the model
2
separate operating instructions
Note:
If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Controls
Controls
Controls
Speed setting
For continuous speed adjustment. Set the
rotary selector between ● (lowest speed)
and 12 (highest speed).
On button
To use the appliance at the preselected
speed.
Turbo button
To use the appliance at maximum speed.
Note:
The appliance remains switched on
as long as one of the buttons is pressed.
Overload
protection
Overload protection
Overload
protection
Only CNHR26 and CNHR26C
If the appliance switches itself off during
use, the overload protection device has
been activated.
Remove the mains plug and leave the appli-
ance to cool down for approx. 1 hour to de-
activate the overload protection device.
Note:
If the fault cannot be eliminated,
please contact customer service.
Blender
feet
Blender feet
Blender
feet
Note:
The blender feet are not suitable for
preparing purées consisting only of pota-
toes or foods with a similar consistency.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
