Bosch MMBM401W - Инструкция по эксплуатации - Страница 14

14 

en 

Care and daily  cleaning 

Working with the glass blender jug

X

Fig.

D

1. 

Hold the blade insert by the plastic 

ring and insert it – blade first – into the 

blender jug. Turn the blade insert anti-

clockwise until it audibly clicks into place.

2. 

Turn the blender jug over.

3. 

Insert the blender jug into its recess on 

the motor block and turn it clockwise 

until it audibly clicks into place.

4. 

Put the desired ingredients into the 

blender jug. 

5. 

Put the lid and locking cap in place.

6. 

Plug the mains plug into the mains.

7. 

Hold the lid firmly with one hand, but 

don’t place your hand over the filling 

opening. Hold down the 

t

 or 

u

 button 

until the mixture has reached the 

desired consistency.

8. 

Release the button and wait until the 

appliance comes to rest. Disconnect the 

mains plug.

9. 

Turn the blender jug anti-clockwise and 

then remove it.

10. 

Remove the lid.

11. 

Pour the blended food into another 

container.

12. 

Turn the blade insert clockwise and then 

remove it.

Caution!

Never set the blade insert down with the 

blade underneath. This could damage 

the blade and scratch your work surface. 

X

Fig.

B

Clean all the parts. 

X

 “Care and daily 

 cleaning” see page 14

Adding more ingredients 

X

Fig.

E

1. 

Release the button and wait until the 

appliance comes to rest. 

2. 

Remove the locking cap or the entire lid.

3. 

Add the extra ingredients.

4. 

Replace the lid and the locking cap, and 

again hold down the 

t

 or 

u

 button.

Note:

 you can remove the locking cap by 

turning it anticlockwise.

Care and daily  cleaning

The appliance and all the attachments 

and accessories used must be thoroughly 

cleaned after each use. 

W

Risk of electric shock!

– Unplug the appliance before cleaning it.

– Never immerse the base unit in liquids 

and do not clean in the dishwasher.

– Do not use a steam cleaner.

W

Risk of injury!

Do not touch the blender blades with your 

bare hands.

Caution!

– Do not use any cleaning agents 

 containing alcohol or spirits.

– Do not use any sharp, pointed or metal 

objects.

– Do not use abrasive cloths or cleaning 

agents.

Notes:

– It is best to clean the parts immediately 

after use. This will prevent residues from 

drying on and possibly attacking the 

plastic (e.g. essential oils in herbs).

– Pour a little water and washing-up liquid 

into the empty blender jug and hold 

down button 

u

 for a few seconds.

– The plastic parts may become dis-

coloured when you process certain ingre-

dients, such as carrots, but this can be 

removed with a few drops of cooking oil.

In 

Fig.

F

 you will find a summary of how to 

clean the individual parts.

Base unit

Wipe the outside of the base unit with a 

soft, damp cloth and dry off.

Blade holder

Remove the seal before cleaning. Only clean 

the blade holder with a brush under running 

water. Don’t leave it soaking in water! 

X

Fig.

H