Bosch MMBM401W - Инструкция по эксплуатации - Страница 13

 13

 en

Beforeusingforthefirsttime

Before using for the 

first time

Before the new appliance can be used, 

it must be fully unpacked, cleaned and 

checked.

Caution!

Never operate a damaged appliance!

■

Remove the base unit and all accesso-

ries from the packaging.

■

Remove the packaging material that is 

present.

■

Check that all the parts are present and 

examine them for obvious damage. 

X

Fig.

A

■

Thoroughly clean and dry all parts 

before using for the first time. 

X

 “Care 

and daily  cleaning” see page 14

Use

W

Risk of injury!

– Do not insert the mains plug until all 

preparations for working with the appli-

ance are complete and the required 

attachments are assembled correctly 

and connected to the base unit.

– Never process food that is hotter than 

50°C in the plastic blender jug.

– Handle the blade insert with care, and 

don’t put your hand between the blades. 

X

Fig.

B

– Never put your hand in the blender jug 

once it is in place, and always put the lid 

on before using the appliance.

W

Risk of scalding!

Pour no more than 0.3 litres of hot or froth-

ing liquid into the glass blender jug.

■

Place the base unit on a stable and level 

work surface.

■

Completely unwind the mains cable. 

Using the to-go or chopper 

blender jug

X

Fig.

C

1. 

Put the desired ingredients into the 

blender jug.

2. 

Hold the blade insert by the plastic 

ring and insert it – blade first – into 

the blender jug. Turn the blade insert 

anticlockwise until it audibly clicks 

into place.

3. 

Turn the blender jug over.

4. 

Insert the blender jug into its recess on 

the motor block and turn it clockwise 

until it audibly clicks into place.

5. 

Plug the mains plug into the mains.

6. 

Hold the blender jug firmly with one 

hand. Hold down the 

t

 or 

u

 button until 

the mixture has reached the desired 

consistency.

7. 

Release the button and wait until the 

appliance comes to rest. Disconnect the 

mains plug.

8. 

Turn the blender jug anti-clockwise and 

then remove it.

9. 

Turn the blender jug over.

10. 

Turn the blade insert clockwise and then 

remove it.

Caution!

Never set the blade insert down with the 

blade underneath. This could damage 

the blade and scratch your work surface. 

X

Fig.

B

11. 

Close the jug with the lid.

12. 

To pour out or drink contents, undo screw 

cap and remove, or lift up drinking cap.

Clean all the parts. 

X

 “Care and daily 

 cleaning” see page 14