Блендеры RUSSELL-HOBBS 25710-56 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved. Children must
not use or play with the appliance. Keep the appliance and cable out of
reach of children.
c
To avoid injury, take care when handling the blades, emptying the jug,
and cleaning.
h
Don’t add hot liquid (over 40°C) as it may be ejected due to sudden
steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualified to avoid a hazard.
l
Don’t put the motor unit in liquid.
•
Switch off (
O
) before fitting or removing the jug to the motor unit.
•
Don’t use accessories or attachments other than those we supply.
•
Don’t use the appliance for any purpose other than those described in these instructions.
•
Don’t operate the appliance if it’s damaged or malfunctions.
•
Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes switch
off for at least 2 minutes, to recover.
HOUSEHOLD USE ONLY
PARTS
1. Speed control
2. Motor unit
3. Collar
4. Blade unit
5. Jug
6. Lid
7. Cap
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Check that the speed control is set to
O
.
3. Align the
d
on the bottom of the jug with the
U
on the motor unit (fig. A).
4. Lower the jug on to the motor unit, then turn the jug to align the
d
with the
L
(fig. B). Your blender
will not operate unless the jug is correctly fitted and locked.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
