Centek CT-1331 - Инструкция по эксплуатации - Страница 13

13

1. Install the blade in the chopper bowl center mount and fix it in place.

2. Place the ingredients (max. 250 g) in the bowl.

3. Install the chopper lid.

4. Insert the blender housing into the coupling and ensure that it is

properly engaged.

5. Press the TURBO mode button to activate the unit.

6. After use, press the attachment release button to disconnect the blender 

unit from the chopper bowl.

7. Turn the lid counterclockwise to disconnect it and lift it up.

8. Remove the blade by gently turning and lifting it.

USING THE WHISK ATTACHMENT

Use the whisk attachment only for whipping cream, making sponge dough 

or mixing ready-made desserts.

1. Insert the whisk attachment into the device body.

2. Connect the appliance to the mains.

3. Put the ingredients in a bowl (for best results, use a large and deep bowl).

4. Immerse the whisk completely in the whipped product. To avoid splashing, 

start the whipping at a slow speed.

ATTENTION! 

Before assembling, make sure that the plug of the power cord 

is not plugged into an outlet.

AT TENTION! 

It is forbidden to use a whisk for kneading a steep (tightly 

kneaded) dough. The products are placed in the container before the device 

is turned on. Do not overfill the mixing container.

5. MAINTENANCE

ATTENTION!

- Carefully remove all attachments.

- Use a slightly damp cloth to wipe the motor and gear units of the blender,

then wipe them dry.

- Af ter processing salty and sour foods immediately rinse the used

attachments with water.

- When processing highly staining foods (e.g. carrots or beets) the 

attachments and vessels may become stained; wipe them with fabric 

dampened in vegetable oil, then rinse with water.

- Wash the attachments, measuring cup, bowl with warm water, rinse 

and let dry.

- Place the shredding blade into the bowl, put the plastic cap on the blade.

Never submerge the motor and gear units in water or any other liquids, 

wash them under a jet of water or place in a dishwasher.

Clean the appliance before putting it away for prolonged storage.

- Do not wind the power cord around the motor unit.

- Store the blender set in a cool dry place, out of reach of children.

6. SPECIFICATIONS

- Rated voltage: 220-240 V ~50/60 Hz

- Nominal power rating:  1000 W

- Maximum power rating: 1500 W

7.

 DI SPOSAL 

Upon expiry of its service l ife the appl iance can be disposed of separatel y 

from ordinary domestic waste. You can turn it over to a special ized el ectric and 

el ectronic appl iance disposal  and recycl ing centre.

8.

 CERT I FI CAT I ON DAT A, GU ARANT EE

The service l ife of this item is 5 years since the date of sal e to the end 

user, provided the item wil l  be used in strict accordance with the present

manual  and the appl icabl e technical  standards. Upon expiry of the service 

l ife pl ease contact the nearest authorized service centre for suggestions as 

to further operation of the appl iance. The manufacturing date of the 

appl iance is integrated into the serial  number (digits 2 and 3 - year, digits 4 

and 5 - month of manufacture). If any questions rel ated to appl iance 

maintenance shoul d arise, or if the appl iance has mal functions, appl y to the 

CENTEK TM Authorized Service Center. The address of the service center can be 

found on the website https://centek.ru/servis. Service support contacts: Phone: 

+7 (988) 24-00-178, VK: vk.com/centek_krd. General  Service Center: OOO 

«Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.

The product is provided with the 

Certificate of Conformity:

№ ЕАЭС RU С

-

CN.АД07.В.02975/21 of 08.02.2021 y.

9.

 MANU FACT U RER AND I MPORT ER I NFORMAT I ON

I mpo r t ed t o  EAEU  by: 

Individual niy Predprinimatel  Asrumyan Karo 

Shurikovich. 

Addr es s :

 Russia, 350912 Krasnodar, ul . Atamana Lysenko, 

23, pgt. Pashkovskiy, phone: +7 (861) 2 600 900. 

DEAR VALUED CONSUMER!

The guarantee period for all appliances amounts to 12 months since the 

date of sale to the end consumer. With this Warranty Card the Manufacturer 

confirms the proper condition of the appliance and undertakes to repair, free 

of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

1. The guarantee shall be valid if the following documentation conditions

are observed:

- The original Warranty Card shall be filled out correctly and clearly, indicating 

the of appliance model, serial number and sale date, the stamp of the seller 

company and signature of its representative shall be available, as well as 

the stamps on each coupon and the buyer’s signature in the Warranty Card.

The Manufacturer reserves the right to reject guarantee maintenance if the 

buyer fails to provide the abovementioned documents or if the information 

contained therein is incomplete, illegible or ambiguous.

2. The guarantee shall be valid if the following operation conditions are observed:

- the appliance is used in strict accordance with the present manual;

- the safety rules and requirements are observed.

3. The guarantee does not apply to regular maintenance, cleaning, installation

and setup of the appliance at the owner’s location.

4. The guarantee does not apply in the following cases:

- mechanical damage;

- normal wear of the appliance;

- non-observance of operation requirements or erroneous actions on the 

part of the user;

- improper installation or transportation;

- natural disasters (lightning, fire, flood, etc.), as well as any other causes

beyond the Manufacturer’s or Seller’s control;

- ingress of foreign objects, liquids or insects into the inside of the appliance;

- repairs or modifications to the appliance by unauthorized persons;

-  use  of  the  appliance  for  commercial  purposes  (loads  exceeding 

normal domestic application), connection of the appliance to utility and

telecommunication networks incompliant with national technical standards;

- failure of the following accessories, if replacement of these is allowed by

design and does not involve disassembly of the appliance:

a) remote control units, rechargeable batteries, replaceable batteries (power 

cells), external power supply units and chargers;

b) consumables and accessories (packaging, covers, slings, carry bags, mesh 

screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, 

nozzles, dust collectors, filters, smell absorbers);

- for battery-powered appliances – operation with inappropriate or depleted

batteries;

- for rechargeable battery-powered appliances – any damage caused by

improper battery charging and recharging.

5. The present guarantee is provided by the Manufacturer in addition to the

consumer rights determined by the applicable legislation and does not limit 

these rights in any way.

6. The Manufacturer shall not be made liable for possible damage, directly or 

indirectly inflicted by CENTEK brand products on people, domestic animals, 

the consumer’s or third persons’ property if such damage is inflicted as the 

result of non-observance of appliance installation and operation requirements, 

deliberate or negligent actions (omission) by the consumer or third persons, 

as well as of force majeure circumstances.

7. Service centers will only accept appliances in a clean state (there should 

be no food residues, dust and other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications 

of the appliance without prior notice.