Bugatti Blender Vela 4105 - Инструкция по эксплуатации - Страница 9

21

Important safeguards

23. 

The lid (2) and measuring filler cup (1) must always be in position when the blender is running.

24. 

Never use your hands to insert food. Use the measuring filler cup or appropriate utensils to pour or

insert food into the jar.

25

.   Do not att empt to remove the safety devices: you could cause serious personal injury or severely

damage the blender.

26. 

Always start blending at a low speed and increase speed only if necessary.

27

. 

Never leave the blender running (blending food) for more than 2 minutes  

to prevent overheating.

After each 2 minutes operating cycle, let the blender rest for at least 30 seconds. All types of food can
be blended within a minute, especially liquids and small portions. The Vela Blender has an auto power-off
function in order to avoid serious damages on the mechanical parts of the complete blade unit (5). After 3
minutes  of continuous working the blender will stop automatically. To reset the function move the speed
selector (12) to the zero (0) position and wait for 1 minute. In this way the blender starts to work again.

28

. The jar (3) is not for storing food. Always keep it empty and clean when not in use.

29. 

For best results: cut food into cubes measuring approximately 1.8cm (3/4") by 2.5cm (1"). Cut  cheese

into pieces measuring no more than 1.3 cm (1/2 inch).

30. 

31. 

Before blending hot liquids always remove the measuring filler cup (1)

When blending hot liquids use oven gloves

32. 

If you wish to make cold drinks from foods having high density, add an ice cube each time to reach the

desired consistency. Use the pulse button (14) to obtain a better result.

33. 

In the event of faults, defects or suspected defects after a fall, remove the plug immediately from the

power socket. Never use the blender if it is faulty. Repairs must be carried out by CASA BUGATTI Service
Centre. Contact your dealer and/or CASA BUGATTI Customer Care.
Use a carbon dioxide (CO2) extinguisher to fight fires. Do not use water or powder extinguishers.

34.

 Vela Blender is well equipped with an over-temperature automatic protection. This system will give 

much longer life to the motor of your blender.  

Should the unit be overheated and stop functioning,

please unplug the unit and let it cold down for around 30-40 minutes.  After cooling down the blender 
will be able to operate again normally.   

IMPORTANT SAFEGUARDS