Aresa AR-1119 - Инструкция по эксплуатации - Страница 6

ENGLISH

WHISK 

USAGE

Use a whisk for whipping cream, egg white, biscuit dough, mashed potatoes, soup, sauce, etc.

1. Install the whisk (11) on the motor base (4) until it is fully locked.

3. Connect the device to the network. Insert the whisk into the container and press the switch 

button (2). When the device is operating, you can adjust the speed of rotation using the speed 

regulator (1). To do this, while holding the switch button, move the speed regulator to the right 

or left respectively to increase or reduce the speed of rotation of the whisk. For maximum speed 

of rotation of the whisk, press "Turbo" button (3).

4.After finishing work, wait for the whisk to stop completely and remove it from the container. 

Unplug the blender. Then disconnect the whisk from the motor base by pressing simultaneously 

on the locking clamps for attachments (5).

                                                                                           USAGE OF SUBMERSIBLE BLENDER ATTACHMENT 

The submersible blender is ideal for making sauces, mayonnaise,

gravy, soups, baby food and also all kinds of cocktails.

1. Install the submersible blender (6) onto the motor bse (4) until it is fully locked.

2. Connect the device to the network. Insert the blender into the container and press the switch 

button (2). During the operation of the device, you can adjust the rotation speed of the blender 

knife using speed regulator (1). To do this, while holding the switch button, move the speed 

regulator right or left, respectively, to increase or decrease speed rotation of the knife. For 

maximum speed of rotation of the whisk, press "Turbo" button (3).

3. When finished, unplug the blender. Wait for the knife to stop completely. Then disconnect the 

submersible blender attachment from the motor base by pressing simultaneously on the locking 

clamps for attachments (5).

                                                                                                            CHOPPER USAGE

1. Place the chopper cup (8) on the table, insert the chopping blade (9) into the cup, after add 

necessary 

ingredients

.

2. Install the chopper lid (10) onto the cup (8).

3. Insert the motor base (4) into the hole in the lid until it locks.

4. Connect the device to the network and press the switch button (2). When the device is 

operating, you can adjust the speed of rotation using the speed regulator (1). To do this, 

while holding the switch button, move the speed regulator to the right or left respectively 

to increase or reduce the speed of rotation of the whisk. For maximum speed 

of rotation of the whisk, press "Turbo" button (3).

6. When finished, unplug the blender. Wait for the knife to stop completely. Take off

the motor base and then the chopper lid. Remove the chopping blade. Only after that

pour the ready product into the prepared container.

ATTENTION! Take the chopping blade carefully, as they are very sharp.

TRANSPORTATION. Transportation of the device is necessary by any kind of covered transport with the application of rules

fastening of cargoes ensuring

preservation of the presentation of the product and / or packaging and its further safe operation.

DO NOT expose the device to shock loads during handling 

operations.

CLEANING. ATTENTION! Never wash parts of the appliance in the dishwasher. Do not use chemicals or abrasives.

Always unplug the appliance before cleaning.

Clean the motor part with a soft, slightly damp cloth. Do not wash it under running water or immerse it in water 

or other liquids.

For washing, use warm water (not more than 50 ° C) and a usual detergent, be careful with the blades, as they are very sharp.

Parts of the appliance having direct contact with food must be cleaned every time after use.

ATTENTION!

Do not use knives with a damaged working edge, covered with corrosion or contaminated.

STORAGE. The device must be stored indoors, in conditions that presume the preservation of a presentation

product and its further safe operation. Make 

sure that the appliance and all its accessories are completely dried,

before storing it.

When purchasing the product, ask for it to be checked in your presence.

Without the having a warranty card or when it is not properly filled in,

the quality claims are not accepted, and no warranty repair is performed.

The warranty card should be presented at any address to the service 

center during the whole warranty period. The product is accepted for service in a complete set only. The warranty period is calculated from the 

moment of sale to the buyer. Keep the documents confirming the date of purchase of the product (cash receipt).

The condition of free warranty service of your product is its correct operation, which does not go beyond personal domestic needs, in accordance

with the requirements of the operating instructions for the product, the absence of mechanical damages and the consequences of careless 

handling of the product.

The product is accepted for warranty service in its pure form.

The warranty covers all manufacturing and construction defects (except those 

listed in the "Warranty does not apply" section), identified during the warranty period. During this period defective parts, except consumables,

are subject to free replacement in the warranty service center.

     OPERATION

ATTENTION! Before assembling the blender, make sure that it is not plugged in.

Remove the appliance and accessories from the packaging. Do not leave packing materials (bags, polystyrene, etc.) in accessible places

 for children to avoid dangerous situations.

Clean the appliance with a damp soft cloth. Be sure to wash all accessories in accordance with the recommendations described in the

 "Transport, cleaning and storage" section.

Blender is designed for shredding and whipping food, as well as for making cocktails.

RECYCLING

The appliance and packing materials must be disposed with the least harm to the environment and in accordance with the rules for waste disposal 

in your area.