Блендеры Ariete 583/03 Vintage Beige - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
E N
- 9 -
- Mount the goblet (D) on the motor unit (F) properly and rotate it clockwise making sure the safety
tab snaps into the apposite slot on the motor body (Fig. 4).
- Plug power cord into a socket.
- Start the appliance by turning the operation dial (G) clockwise up to the required speed to start
the blades.
By rotating the operation dial (G) counter-clockwise, the PULSE function is enabled.
If the appliance should fail to start, make sure that the goblet is correctly fitted. The appliance
is fitted with a device to prevent it from operating if the goblet is not fitted or if it has been fitted
incorrectly.
- To stop the appliance, turn the on dial (G) back to «0».
- During use, it is possible to add foods into the goblet, by lifting out the filler cap (A) after having
switched off the appliance.
- It may be necessary to switch the appliance off several times in order to remove food residues
from the goblet sides. In this case, switch the appliance off and unplug it.
- Take the lid (B) out and use the appropriate spatula to remove any remaining food inside the
goblet.
WARNING
:
The blender has a max capacity of 1.25 L for liquids and it is advisable not to exceed this
limit. If it is used for solid food, the maximum capacity is 1.5 L.
Place the foods for blending in the container and fit it to the power base before plugging the
appliance into the mains power.
Never remove the lid (B) during use.
Always remove the blender lid cap (A) before blending warm liquids preventing the liquid
from splashing out of the goblet. Never pour hot liquids into the blender.
Do not operate the appliance for more than 1 minute. The best use is with short pulses for
few seconds.
When using the apposite spatula to remove any residues from the goblet sides, keep it well
away from the blade set to prevent any damage.
BLENDER DISASSEMBLY
- Unplug the appliance from the mains outlet and wait for the blades to come to a complete halt
before removing the goblet (D) from the base.
- Rotate and lift the goblet (D), remove the lid (B)..
- Pour the smoothy into a glass.
