Ryobi RCS5145B 5133001858 - Инструкция по эксплуатации - Страница 7

English

5

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

 WARNING

The warnings and instructions in this section of the 
operator’s manual are for your safety and to prevent 
serious personal injury.

UNDERSTANDING YOUR CHAINSAW SAFETY 
DEVICES

Low kick-back saw chain

A low-kick-back saw chain is a chain which has met the 
kickback performance requirements.

The rakers (depth gauges) ahead of each cutter can 
minimise the force of a kick-back reaction by preventing 
the cutters from digging in too deeply at the kick-back zone. 
Only use replacement chain that is equivalent to the original 

FKDLQRUKDVEHHQFHUWL¿HGDVDORZNLFNEDFNFKDLQ

As saw chains are sharpened, they lose some of the low 
kickback qualities and extra caution is required.

Spiked bumper

The integral bumper spike may be used as a pivot when 
making a cut.

Guide bars

Generally, guide bars with small radius tips have somewhat 
lower kick-back potentials.

Chain brake

Chain brakes are designed to quickly stop the chain from 
rotating. When the chain brake lever/hand guard is pushed 
towards the bar, the chain should stop immediately. A 
chain brake does not prevent kick-back. The chain brake 
should be cleaned and tested daily. Refer to “operation” 
later in this manual for additional information.

A: Run position

B: Brake position

 WARNING

Even with daily cleaning of the mechanism, the 

GHSHQGDELOLW\ RI D FKDLQ EUDNH WR SHUIRUP XQGHU ¿HOG
FRQGLWLRQVFDQQRWEHFHUWL¿HG

 WARNING

Kick-back occurs when the moving chain contacts an 
object at the upper portion of the tip of the guide bar 
or when the wood closes in and pinches the saw chain 
in the cut. Contact at the upper portion of the tip of the 
guide bar may cause the chain to dig into the object and 
stop the chain for an instant. The result is a lightning-
fast, reverse reaction which kicks the guide bar up and 
back towards the operator. If the saw chain is pinched 
along the top of the guide bar, the guide bar can be 
driven rapidly back towards the operator. Either of these 
reactions may cause you to lose control of the saw, 
which could result in serious injury.

Do not rely exclusively upon the safety devices built into 
your saw. As a chainsaw user, you should take several 
steps to keep your cutting jobs free from accident or injury.

 WARNING

Skating - when the chainsaw fails to dig in during a cut, 
the guide bar can begin hopping or dangerously skidding 
along the surface of the log or branch, possibly resulting 
in the loss of control of the chainsaw. To prevent or 
reduce the skating, hold the chainsaw with two hands 
and make sure the saw chain establishes a groove for 
cutting.

TRANSPORTING THE PRODUCT

Ŷ

When carrying the product for short distance (from one 
working area to the next), always apply the brake so 
that the product is blocked (preferably switch off the 
product as well).

Ŷ

Never carry or transport the product while it is running.

Ŷ

To prevent the leakage of fuel or oil and damage in 
general, secure the product when it is transported.

Ŷ

Check the fuel and chain lubricant tanks for leaks.

Drain the tanks prior to transport.

STORING THE CHAINSAW (1 MONTH OR LONGER)

1.  Drain all fuel from tank into a container approved for 

petrol.

2.  Run the engine until it stops. This will remove all fuel-

lubricant mix that could become stale and leave varnish 
and gum in the fuel system.

3.  Drain all bar and chain lubricant from tank into a 

container approved for lubricant.

4.  Clean all foreign material from the saw.
5.  Store it in a well-ventilated place that is inaccessible 

to children.

NOTE:

 Keep away from corrosive agents such as garden 

chemicals and de-icing salts.

Abide by all government and local regulations for the safe 
storage and handling of petrol. Excess fuel should be used 
in other 2-cycle engine powered equipment.

INSPECTION AFTER DROPPING OR OTHER IMPACTS 

Thoroughly inspect the unit and identify any affections or 
damage with the unit. Any damage must be replaced by 
an authorised service center prior to use.

Ŷ

For fuel or chain lubrication leaks

Ŷ

Chain brake function 

Ŷ

Chain tension 

Ŷ

For damaged, loose or broken parts

Ŷ

For loose or damaged fasteners 

Ŷ

Handles and hand guards