VITEK VT-4027-4037 - Инструкция по эксплуатации - Страница 6

Акустика VITEK VT-4027-4037 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 20
Загружаем инструкцию
background image

(2) Make sure the device is properly connected to the audio source.

4. NO SOUND IS COMING FROM THE CENTRAL SPEAKER

(1) Make sure the central speaker is properly connected to the

device.

(2) Make sure the device is properly connected to the audio source.
(3) Increase the volume of the central speaker.

5. NO SOUND IS COMING FROM THE REAR SPEAKERS

(1) Maker sure the rear speakers are connected properly.
(2) Make sure the device is properly connected to the audio source.

NOTE: The central and rear speakers only work if the system is con-
nected to a six-channel audio source (for example, a DVD player with
an AC-3/Dolby Digital decoder) or, if in 3D mode, when connected
through the 2.1 CH audio input. 

APPENDIX

When connecting the device to a DVD player with a built-in DD/DTS
decoder, verify the following:
1. When connected through the 5.1 CH. audio input, the 5.1 CH audio
output should be chosen in the player's settings. Playback discs with
AC-3/Dolby Digital 5.1 CH audio tracks. 
2. To turn on the subwoofer, make sure that the speaker size in the
player's settings for the front, central and rear speakers is "Small"
and that the subwoofer output is set to "On."

When connecting the device to DVD player, carefully read the operat-
ing instructions for the DVD player.

PRECAUTIONARY MEASURES:

Attention:

Please carefully read the points listed below to ensure

safe use of the device.

1.  Read the instructions - The safety instructions and operating

rules should be read before using the device.

2.  Save the instructions - Save the instructions for future use.
3.  Follow the operating rules - All of the safety instructions should

be followed.

4.  Warning symbols - Heed the indications of all warning symbols

located on the device's panels or in these instructions.

5.  Power source - The device should only be connected to a power

source with the characteristics indicated on the rear panel of the
device or in these instructions.

6.  Protecting the power cord - The power cord should be laid out in

such a way that it will not be damaged by external items or its
surroundings.

7.  Water and moisture - Do not use the device near reservoirs of

water (for example, bath tubs, sinks, etc).

8.  Ventilation - Install the device in a well ventilated room. Do not

install the device on couches, beds or carpets because the
device's ventilation may be blocked. 

9.  The effects of heat - Do not install the device near heat sources

(for example, radiators, kitchen stoves, etc).

10. Periods of non-use - if the device will not be used for a long peri-

od of time, disconnect the power plug from the electrical outlet.

11. The need for maintenance - Utilize the services of qualified tech-

nicians if:

The power cord is damaged; or

The device body is damaged; or

The device was subjected to rain; or

The device is not functioning properly; or

The device was subjected to shock.

12. Repair service - The consumer should not attempt to repair the

device himself. Use only the services of a qualified technician.

13. Clean the device with a dry, soft clothe only.
14. Turn off the device during thunderstorms or when not in use for a

long period of time.

TECHNICAL CHARACTERISTICS

Power supply: 

~220-230 Volts

Output power: 

60 W (Subwoofer) 
+ 5 x 35 W (Satellite speakers) 

Subwoofer speaker: 

8"/4 Om

Satellite speakers: 

2"/8 Om

Channel separation: 

>45 dB

Signal/noise ratio: 

>85 dB

Reproducible frequency band: 

35 Hz - 200 Hz (Subwoofer)
150 Hz - 20 KHz (Satellite speakers)

AM/FM Tuner
General FM tuner characteristics:

Frequency band: 

87.00 MHz ~108.00 MHz

Frequency tuning step: 

50/100 KHz

Intermediate frequency of oscillation: 

10.7 MHz 

Temperature range: 

-5  - +70°C

Antenna input impedance: 

75 Om

Signal/noise ratio: 

>45 dB

General AM tuner characteristics:

Frequency band: 

522 KHz ~ 1610 KHz

Frequency tuning step: 

9/10 KHz

Intermediate frequency of oscillation: 

450 KHz

Temperature range: 

-5  - +70°C 

Signal/noise ratio: 

>45 dB

The technical characteristics of the device may be changed without
prior notice.

Service life – no less than 5 years.

Guarantee 

Details regarding guarantee conditions can be obtained from the
dealer from whom the appliance was purchased. The bill of sale or
receipt must be produced when making any claim under the terms of
this guarantee.

This product conforms to the EMC-Requirements as laid
down by the Council Directive 89/336/EEC and to the Low
Voltage Regulation (23/73 EEC)

ENGLISH

6

4027.qxd  04.10.2005  11:16  Page 6

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-4027-4037?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"