Акустика Sven SPS-707BL - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
POWER
ON
OFF
PC
AUX
~100V-240V/50Hz-60Hz
R
L
–
+
SPEAKER OUT
•
Select a desired signal source by pressing short the button INPUT
f
on the control panel or
buttons BT
a
or PC/AUX
d
on the remote control (RC), after that the LED of the selected input
will illuminate on the control panel: BT
a
, PC
b
or AUX
c
respectively.
•
Adjust the volume level with buttons VOL+/-
h
/
i
on the speaker control panel or with buttons
VOL+/-
e
on the remote control (see Fig. 3).
•
Adjust the treble and bass levels with buttons TREBLE +/-
g
and BASS +/-
k
on the RC. It is also
possible to use buttons VOL-/+
h
and
i
on the speaker control panel by
fi
rst pressing the MODE
button
g
; Bass
d
or Treble
e
LED will illuminate on the control panel during the adjustment.
•
After using the MSS, mind to switch it o
ff
with the ON/OFF switch
l
(OFF position) and unplug
the power cable from the mains socket.
Bluetooth mode
•
For the signal transmission in this mode it is necessary
fi
rst to interconnect the MSS with a signal
source. For this press and hold the button
c
on the remote control or button
g
on the top pannel
prior to change the blue LEDs with a constant illumination to intermittent one. The MSS will go to the
search mode. Then on the signal source (telephone, smartphone, etc.) choose the search mode of
devices with Bluetooth. The name of the MSS “SPS-707BL” will be displayed on the signal source
screen, with which you need to intercommunicate*. Select this device and the “connect” command.
•
When connecting to the source it is possible to control the player with the remote control using
the buttons
f
,
j
.
–
+
CD
Phone
Fig. 4. Audio sources connection diagram
Power cable
2RCA to mini-jack
signal cable
Mini-jack to mini-jack
signal cable
PC
PC
Player
Audio cable
*
If the MSS has been already listed in the device list of the signal source, then the second activation of
the search mode is not required. Select only this device and the “connect” command. You might have
to enter “0000” code to connect some models of devices via Bluetooth.
ENG
21
Operation Manual
SPS-707bL
