Акустика Sven SPS-611S - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
16
ENG
2.0 Multimedia Speaker System
If none of the above methods can solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound.
There is too quiet
sound of speakers.
Distortion of
sound.
Cause
The MSS isn’t connected to a mains outlet.
The power switch is o
Ԛ
.
The volume level is set at minimum value.
Improperly connected audio source.
Volume level is set at minimum value.
Large amplitude of the input signal.
Solution
Check the connection.
Turn on the switch.
Adjust the volume control knob.
Connect audio sources correctly.
Adjust the volume control knob.
Turn down the source volume
and the MSS volume.
6. TROUBLESHOOTING
•
Before making any connections, be sure that all components are switched o
Ԛ
.
•
Connect the speakers with the audio cable.
•
Insert the mini-jack of the signal cable into the line output of your PC sound card, video or audio
equipment and so on. Then connect two signal cable plugs to the corresponding active speaker
output jacks (match the colours).
•
Plug the power cord to the power socket.
•
Adjust the volume knobs
a
to the minimum; switch on the power supply with the POWER knob
d
on the side of the active speaker.
•
Adjust the volume knob
a
to the necessary volume.
•
Adjust the TREBLE
b
and BASS
c
knobs as desired.
Notes:
• After using the MSS, mind to switch it off and unplug the power cord from the mains
socket.
• To improve the sound quality, use the Line-Out output of your sound card.
