Акустика Sven SPS-580 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

2.0 Multimedia
Speaker System
ENG
14
PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter away.
•
Place MSS far away from monitors and TV sets, as insignificant image distortion in these
supersensitive devices is possible.
MSS Connecting
SPS-580 2.0 Multimedia Speaker System can be connected to virtually any audio source: MP3
player, PC sound card, etc. (see connection diagram, Fig. 2).
•
Before making any connections, make sure that the MSS power supply is disconnected. Plug the
built-in 3.5 mm mini-jack signal cables: connect the audio cable (green mini-jack) to the audio output
jack of your sound source and the microphone cable (pink mini-jack) – to the microphone jack (Fig. 2).
•
Connect the speaker to the mains outlet.
•
Turn on your audio source.
•
Adjust the master volume level by turning the VOLUME control knob
a
. To increase the volume,
turn the knob clockwise; to reduce it, turn the knob counterclockwise.
•
Plug your microphone into the microphone jack
b
, and your headphones into the headphone jack
d
.
Notes:
• After finishing using the MSS, mind to switch it off.
• To improve the sound quality, use the Line-Out output of your sound card.
Fig. 2. Connection diagram
Power cord
Mobile
device
PC
Socket
Audio cable
to MIC input
to audio source