Акустика SVEN SPS-576 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENG
3
SPS-576
User Manual
2. PACKAGE CONTENTS
•
Speaker System — 1 pc
•
User manual — 1 pc
•
Warranty card — 1 pc
3. SAFETY PRECAUTIONS
•
Do not open the MSS and do not perform repairs by yourself. Service and repairs should
be performed only by qualified specialists at authorized service centers. The list of authorized
service centers is on
www.sven.fi.
•
Do not allow the circuit of wires (including the grounded ones) between the speakers,
on the power amplifier or the ground, for it causes damage to the power amplifier output stage.
•
Make sure that foreign objects do not get inside the holes of the MSS.
•
Protect the MSS from high humidity, water and dust.
•
Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose
it to direct sunlight.
•
Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
•
If the MSS does not operate, unplug it and address your dealer.
4. TECHNICAL DESCRIPTION
SPS-576 2.0 USB Multimedia Speaker System (MSS) is designed to play music and sound games,
movies, etc. The MSS is powered via a PC or laptop USB port or a 5V DC power supply by means
of the integrated USB cable. The speaker with an audio input and a control panel is named
“the active speaker“.
Special features
•
Wireless signal transmission via Bluetooth.
•
Rotary volume control knob on the side panel.
•
Tweeter for detailed reproduction of high frequencies.
•
USB-powered.
Control panel
a
Power/Mode LED.
b
Volume control knob; switching modes button: Blue
-
tooth/AUX (short pressing); Disconnect from device (dou
-
ble pressing in Bluetooth mode); switching to ST-BY mode
(long pressing).
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least
one meter away.
•
Place MSS far away from monitors and TV sets, as insig
-
nificant image distortion in these supersensitive devices
is possible.
MSS Connecting
•
Before connecting, make sure that the MSS is unplugged.
Insert the 3.5 mini-jack signal cable built into the active
speaker into the sound source audio output (see Fig. 2).
•
Set the master volume level to its minimum by turning
the volume control knob
b
counterclockwise until it stops.
Fig. 1. Control panel
a
b
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
